Preset counters electronic 2 presets, printer interface Display LED, 8-digits, programmable NE213 Features –– Preset counter with two presets –– Display batch counter, main counter: 6-digits –– Display totalizer: 8-digits –– Batch counter, totalizer, hour counter –– Operating mode, start count, scaling factor programmable –– Preset mode programmable –– Printout by F-key or singal input –– Printer interface RS232 NE213 - LED Preset counter Technical data - electrical ratings Technical data - electrical ratings Voltage supply Interface RS232 Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 22...50 VAC (50/60 Hz) 85...265 VAC (50/60 Hz) 24 VDC ±10 % Power consumption 15 VA, 8 W Sensor supply 24 VDC ±20 % / max. 200 mA Emitted interference DIN EN 61000-6-4 Display LED, 7-segment display Interference immunity DIN EN 61000-6-2 Number of digits 8-digits - totalizer 6-digits - main counter, batch counter, tachometer, hour counter Programmable parameters Digit height 7.6 mm Operating modes Sensor logic Scaling factor Count mode Control inputs Function Preset counter Main counter with 2 presets Batch counter with 1 preset Totalizer Printer interface Approvals UL/cUL, CE conform Operating temperature 0...+50 °C Scaling factor 0.0001...9999.99 Storing temperature -20...+70 °C Multitplier / batch counter 1...99 Relative humidity 80 % non-condensing Count modes Adding or subtracting A-B (difference counting) A+B total (parallel counting) Up/Down A 90° B phase evaluation E-connection Plug-in screw terminals Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 face with seal Operation / keypad 10 figure keypad with 5 function keys Housing type Built-in housing Dimensions W x H x L 72 x 72 x 108 mm Installation depth 108 mm Mounting Clip frame Cutout dimensions 68 x 68 mm (+0.7) Materials Housing: Makrolon 6485 (PC) Keypad: Polyester Weight approx. 320 g Operating modes Step preset, Main preset, Parallel alignment, Trailing preset Data memory >10 years in EEPROM Reset Button, electric or automatic Outputs electronic NPN / PNP transistor switch Outputs relay Potential-free change-over contact for main counter Normally open/closed potentialfree for B1 Output holding time 0.01...99.99 s 1 www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. 15 Hz, 25 Hz, 10 kHz programmable 30/10/2008 Counting frequency Technical data - mechanical design Preset counters electronic 2 presets, printer interface Display LED, 8-digits, programmable NE213 Connection diagram Block circuit diagram Relay outputs Voltage supply 19 TxD Sensor supply max. 265 V 16 8 B1 7 6 P2 5 4 14 13 B 12 A 2 3 1 P1 12 B 13 Reset 14 Stop/Hold 15 XB-signalinput 16 XB-reset 17 Coding for input logic NPN Br. 18-20 PNP Br. 18-19 16 15 terminal - terminal / 8 P2 Output 7 6 5 P1 4 14 13 12 B A Output 4 Main counter with 2 presets start count scaling factor 5 P1 6 7 Batch counter as preselection counter with 1 preset multiplier tachometer or batch counter P2 9 10 11 B1 Operating time meter 23 Interface RS232 Trigger level Count - terminal 3 2 Optocoupler inputs Input circuit Control inputs PNP- / NPN-logic Count input 1 Supply voltage 9 XB-reset Sensor supply B1 17 +24V 0V max. 265 V 10 18 XP-reset 19 XP-Stop/ h-counter 20 RS232 11 + GND 26 21 XB-counter 22 NPN Br. 18-20 PNP Br. 18-19 RxD 23 TxD GND 24 18 RxD 25 Electronic outputs 25 A 90° B 8 TxD 26 20 Sensor supply - Totalizer Signal input A Count - terminal 3 + 19 Trigger current 9...16 mA Switch-off current <0.5 mA Input resistance 1.65 kΩ Reset input Trigger current 5...8 mA Switch-off current <0.5 mA Input resistance 3.3 kΩ Relay outputs Output circuit Switching voltage max. 250 VAC / 110 VDC Switching current max. 1A Switching capacity max. 150 VA / 30 W Relay responding time 5 ms Electronical outputs Output circuit PNP-switching transistor Open collector Switching voltage 24 VDC ±20 % Switching current max. 10 mA (AC) 50 mA (DC) NPN-switching transistor Open collector 2 Switching voltage max. 35 V Switching current max. 50 mA www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. 9 terminal - terminal / 15 2 30/10/2008 10 17 +24V 0V RS232 11 18 Supply voltage 20 XP-reset 21 XP-Stop/ h-counter 22 XB-reset 23 XB-counter 24 NPN Br. 18-20 PNP Br. 18-19 25 RxD GND 26 - Preset counters electronic 2 presets, printer interface Display LED, 8-digits, programmable NE213 Part number NE213. 3 AX09 Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 12...30 VDC 1 2 3 4 Outputs Relay outputs, B1 normally closed Relay outputs, B1 normally open Electronic outputs PNP Electronic outputs NPN Interface 3 RS232 Dimensions 108 105 1-6 7 3 www.baumerivo.com 30/10/2008 18.5 Subject to modification in technic and design. Errors and omissions excepted. 67.7 72 72 Preset counters electronic 2 presets, printer interface Display LED, 8-digits, programmable 4 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. NE213