Tachometer electronic Rotation speed and velocity display Large 14 mm display LED, 6-digits, programmable TA200 Features –– Tachometer for rotation speed and velocity –– Display 6-digits –– Connection: One-channel digital sensor or potentialfree contact –– Impulse evaluation, sensor logic programmable –– Frequencies up to 40 kHz –– Period duration measurement Technical data - mechanical design Voltage supply Operating temperature 0...+50 °C Storing temperature -20...+70 °C Relative humidity 80 % non-condensing E-connection Plug-in screw terminals Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 face with seal Operation / keypad Membrane with softkeys Housing type Housing for control panel installation Dimensions W x H x L 96 x 48 x 124 mm Cutout dimensions 92 x 45 mm (+0.6) Installation depth 123.75 mm Mounting Front panel installation by clip frame 115/230 VAC ±10 % (50/60 Hz) 24/48 VAC ±10 % (50/60 Hz) 24 VDC ±10 % Power consumption 7 VA, 5 W Sensor supply 12...26 VDC / max. 100 mA Display LED, 7-segment display Number of digits 6-digits Digit height 14 mm Unit displayed 1/s, 1/min, 1/h programmable Function Tachometer Measuring principle Period duration measurement Signal inputs Comparator inputs Input logic NPN / PNP Counting frequency 25 Hz, 40 kHz programmable Scaling factor 0.0001...9999.99 Weight approx. 350 g (AC), 250 g (DC) Data memory >10 years in EEPROM Material Housing: Makrolon 6485 (PC) Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Programmable parameters Measuring units 1/h, 1/min, 1/s Scaling factor Sensor logic Pulse frequency Approvals UL/cUL, CE conform 1 www.baumerivo.com 30/10/2008 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. TA200 - LED-Tachometer Tachometer electronic Rotation speed and velocity display Large 14 mm display LED, 6-digits, programmable TA200 Part number Block circuit diagram TA200.00 AXA1 Voltage supply Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 24 VDC Signal F1 5 4 3 2 1 Sensor supply max. 250 V terminal - terminal / + 3 4 Sensor supply - 5 + Measuring value F1 8 Trigger level Supply voltage 6 0V 7 +24V 8 2 Signal F1 Connection diagram 9 - Comparator input Input circuit Inputs PNP- / NPN-logic Input level Programmable Input level Low 0...2 VDC Input level High 3...40 VDC Input resistance 3 kΩ - terminal Dimensions 96 7 48 123.75 19.75 Subject to modification in technic and design. Errors and omissions excepted. 1-10 2 www.baumerivo.com 30/10/2008 109