Preset counters electronic 1 preset, timer programmable Display LED, 5-digits, programmable NE210 Features –– Preset counter with one preset –– Display 5-digits –– Operating mode, start count, scaling factor programmable –– Connection: Incremental encoder or digital sensors –– Time meter with four time ranges –– Time relay with operation and release delay –– Programmable as a time counter NE210 - LED Preset counter Technical data - electrical ratings Technical data - electrical ratings Voltage supply 24/48 VAC ±10 % (50/60 Hz) 85...265 VAC (50/60 Hz) 24 VDC ±10 % Programmable parameters Power consumption 5 VA, 5 W Sensor supply 24/48 VAC: 12-26 VDC/50 mA 85...265 VAC: 24 VDC ±20 %/100 mA 24 VDC: 24 VDC ±20 %/100 mA Operating modes Sensor logic Scaling factor Count mode Time relay function Approval UL approval / E63076 Display LED, 7-segment display Number of digits 5-digits Digit height 7.6 mm Function Preset counter Main counter with 1 preset Scaling factor 0.001...99.999 Count modes Adding or subtracting Difference counting A-B Total (parallel) A+B Up/Down A 90° B phase evaluation 0...+50 °C Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Connection Plug-in screw terminal connector Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 (face with seal) Operation / keypad Membrane with softkeys Housing type Built-in housing Dimensions W x H x L 48 x 48 x 108 mm Mounting depth 108 mm Counting frequency 15 Hz, 10 kHz (set by Dip switch) Preset 1 preset Mounting Clip frame for built-in housing Operating modes Main preset, Time meter / time relay Cutout dimensions 45 x 45 mm (+0.6) Weight approx. Data memory >10 years in EEPROM 150 g (24 VDC/85-265 VAC), 260 g (24/48 VAC) Reset Button, electric or automatic Materials Outputs electronic NPN / PNP transistor switch Housing: Makrolon 6485 (PC) Keypad: Polyester Outputs relay Change-over contact, floating Output holding time 0.01...99.99 s Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 1 www.baumer.com/motion 14/5/2014 Ambient temperature Subject to modification in technic and design. Errors and omissions excepted. Technical data - mechanical design Preset counters electronic 1 preset, timer programmable Display LED, 5-digits, programmable NE210 Part number Block circuit diagram AXA1 Voltage supply Voltage supply 1 24 / 48 VAC 2 85...265 VAC 3 24 VDC 2 + 3 12 13 Signal input A 7 B 8 Reset Outputs Relay output Relay, signal output PNP Relay, signal output NPN Without relay, signal output PNP Coding for input logic NPN Br. 11-13 PNP Br. 11-12 A 90°B 9 Main counter with 1 preset start count scaling factor Control inputs PNP- / NPN-logic Count input Z 118.033 Adaptor plate for screw mount, face 60 x 75 mm Trigger current 9...16 mA Adaptor plate for clip mount, face 53.2 x 53.2 mm Switch-off current <0.5 mA Input resistance 1.65 kΩ Connection diagram 5 Electr. output 9 4 8 7 B A Reset Count 3 Trigger current 5...8 mA Switch-off current <0.5 mA Input resistance 3.3 kΩ Relay output Output circuit Switching voltage max. 250 VAC / 110 VDC Switching current max. 1A Switching capacity max. 150 VA / 30 W Relay responding time 5 ms Electronical outputs Output circuit PNP-switching transistor Open collector 2 1 End contact Voltage supply 6 NPN Br. 11-13 PNP Br. 11-12 – Sensor supply + 10 electr. output Reset input Adaptor plate for clip mount, face 60 x 75 mm 11 Relay output Trigger level Adaptor plates 12 5 11 Input circuit 13 4 10 Optocoupler inputs Z 118.035 + 6 Timer Time relay Accessories Z 118.034 Sensor supply - Switching voltage 24 VDC ±20% Switching current max. 10 mA (AC) 50 mA (DC) NPN-switching transistor Open collector max. 265 V terminal - terminal / - terminal Switching voltage max. 35 V Switching current max. 50 mA Dimensions 2 www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. 1 2 3 4 - 14/5/2014 NE210.0