0916 SERIES This series of filters has been designed to meet tempest and other requirements where high insertion loss is necessary. This series is designed with feedthru Capacitors to provide attenuation to RF noise at frequencies from below 10 KHz to above 1 GHz Operating Voltage = 125VAC Operating Current = 1,3,5 & 10 amperes Operating Frequency = 50—400 Hz Operating Temperature = -20 to 50 deg. C Dielectric Withstanding (Line-Ground) = 800 VDC for 1 minute Dielectric Withstanding (Line to Line) = 800 VDC for 1 minutes Leakage Current = 56 mA @ 125 VAC, 60Hz Residual Voltage (Max after 5 sec.) = 35 Volts USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884