KINGBRIGHT APEKA3224CGCK

3.2x2.4mm RIGHT ANGLE SMD CHIP
LED LAMP
PRELIMINARY SPEC
APEKA3224CGCK
Features
GREEN
Description
3.2mmx2.4mm RIGHT ANGLE SMT LED, 2.4mm
The Green source color devices are made with
THICKNESS.
InGaAlP on GaAs substrate Light Emitting Diode.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 1500PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAB8805
REV NO: V.3
DATE: JUN/30/2005
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000001
Selection Guide
Part No.
Dice
APEKA3224CGCK
Iv (mcd)
@ 20mA
Lens Type
GREEN (InGaAIP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
36
60
90°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Green
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
574
nm
IF=20mA
Green
570
nm
IF=20mA
Spectral Line Half-width
Green
20
nm
IF=20mA
C
Capacitance
Green
15
pF
VF=0V;f=1MHz
VF
Forward Voltage
Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB8805
REV NO: V.3
DATE: JUN/30/2005
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000001
Green
APEKA3224CGCK
SPEC NO: DSAB8805
REV NO: V.3
DATE: JUN/30/2005
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000001
APEKA3224CGCK
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: DSAB8805
REV NO: V.3
DATE: JUN/30/2005
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000001
PACKING & LABEL SPECIFICATIONS
APEKA3224CGCK
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB8805
REV NO: V.3
DATE: JUN/30/2005
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1204000001