KINGBRIGHT AP3216MGC

3.2x1.6mm SMD CHIP LED LAMP
AP3216MGC
MEGA GREEN
Description
Features
3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
The Mega Green source color devices are
LOW POWER CONSUMPTION.
made with DH InGaAlP on GaAs substrate Light
WIDE VIEWING ANGLE.
Emitting Diode.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAA8436
REV NO: V.7
DATE: MAR/15/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1203000359
Selection Guide
Part No.
Dice
AP3216MGC
Iv (mcd)
@ 20mA
Lens Type
MEGA GREEN (InGaAlP)
Viewing
Angle
Min.
Typ.
2θ
θ1/2
18
70
120°
WATER CLEAR
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Mega Green
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
574
nm
IF=20mA
Mega Green
568
nm
IF=20mA
Spectral Line Half-width
Mega Green
26
nm
IF=20mA
C
Capacitance
Mega Green
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Mega Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Mega Green
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Mega Green
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA8436
REV NO: V.7
DATE: MAR/15/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1203000359
Mega Green
AP3216MGC
SPEC NO: DSAA8436
REV NO: V.7
DATE: MAR/15/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1203000359
AP3216MGC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA8436
REV NO: V.7
DATE: MAR/15/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP:1203000359