1.6X0.8mm SMD CHIP LED LAMP AP1608MGC Features MEGA GREEN Description 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The Mega Green source color devices are LOW POWER CONSUMPTION. made with DH InGaAlP on GaAs substrate Light W IDE VIEW ING ANGLE. Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD0922 REV NO: V.5 DATE:MAR/14/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000024 Selection Guide Part No. Dice AP1608MGC Iv (mcd) @ 20mA Lens Type MEGA GREEN (InGaAlP) Viewing Angle Min. Typ. 2θ θ1/2 18 70 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Mega Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 574 nm IF=20mA Mega Green 568 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0922 REV NO: V.5 DATE:MAR/14/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000024 Mega Green AP1608MGC SPEC NO: DSAD0922 REV NO: V.5 DATE:MAR/14/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000024 AP1608MGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0922 REV NO: V.5 DATE:MAR/14/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000024