4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP APKA4110SEC Features z4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. zLOW POWER CONSUMPTION. SUPER BRIGHT ORANGE Description The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS/REEL. zRoHS COMPLIANT. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ±0. 25(0. 01" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: '6$D1192 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 1 OF 5 EPR:1204000257-01 Selection Guide Part No. Dice APKA4110SEC Iv (mcd) @ 20mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 70 250 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Orange λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: '6$D1192 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 2 OF 5 EPR:1204000257-01 Super Bright Orange APKA4110SEC SPEC NO: '6$D1192 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 3 OF 5 EPR:1204000257-01 APKA4110SEC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: '6$D1192 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 4 OF 5 EPR:1204000257-01 PACKING & LABEL SPECIFICATIONS APKA4110SEC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: '6$D1192 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 5 OF 5 EPR:1204000257-01