4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP APKA4110SYC Features z4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. SUPER BRIGHT YELLOW Description The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS/REEL. zRoHS COMPLIANT. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ±0. 25(0. 01" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: '6$D1193 REV NO: V.3 DATE: JUL/04/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000264-01 Selection Guide Part No. Dice SUPER BRIGHT YELLOW (InGaAlP) APKA4110SYC Iv (mcd) @ 20 mA Lens Type WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 50 100 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 588 nm IF=20mA Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: '6$D1193 REV NO: V.3 DATE: JUL/04/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000264-01 Super Bright Yellow APKA4110SYC SPEC NO: '6$D1193 REV NO: V.3 DATE: JUL/04/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000264-01 APKA4110SYC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: '6$D1193 REV NO: V.3 DATE: JUL/04/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000264-01 PACKING & LABEL SPECIFICATIONS APKA4110SYC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: '6$D1193 REV NO: V.3 DATE: JUL/04/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000264-01