FEATURES PROFESSIONAL LED INDICATORS Ø6.1mm Mounting 520 SERIES PACK QUANTITY = 10 PIECES l Robust stainless steel housing l Counter sunk mounting for flush styling, sunlight readable LEDs l Sealed to IP67 l Vandal Resistant l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 520-301-21 Red Colour Diffused 12 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 520-325-21 Yellow Colour Diffused 12 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 520-324-21 Green Colour Diffused 12 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 520-934-21 Blue Colour Diffused 12 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 520-998-21 Cool White Colour Diffused 12 20 4600 *see below -30 ~ +85^ -40 ~ +100 Yes 520-301-23 Red Colour Diffused 24-28 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 520-325-23 Yellow Colour Diffused 24-28 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 520-324-23 Green Colour Diffused 24-28 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 520-934-23 Blue Colour Diffused 24-28 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 520-998-23 Cool White Colour Diffused 24-28 20 4600 *see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 033/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 520 Series Panel seal Sealing ring Panel and Mounting Hole * Min/max panel thickness is 3m / 6.5mm Dimensions in mm (Typical) Anode termination indicated by long pin Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Stainless steel grade 303 Nut Stainless steel grade 303 Sealing Ring Stainless steel grade 303 Panel Seal Nitrile Termination Phosphor bronze with tin on nickel finish Lock Washer Stainless steel Fresnel lens Polycarbonate Encapsulation PC5430 resin 909-000-00 is gold plated 910-000-00 is tin plated Dimensions in mm (Typical) Not to scale For use with 520 series lamps TECHNICAL CHARACTERISTICS SERIES 520 MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER PANEL REVERSE 500 1000 mw Vdc * = current version NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 6.1 0.65 x,y=15 3.0-6.5 mm Nm mm mm CUTOUT MOUNTING MOUNTING PANEL • = voltage version OPTIONAL FLYING LEADS TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 033/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 301 324, 934 & 998 325 ALSO AVAILABLE Part numbers also available in the 520 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR (Vdc) Vopr VOLTAGE DC (Vdc) Vopr 520-301-04 Red 2.0 520-330-04-50 Red/Green 2.0/2.2 520-301-04-15 Red 2.0 520-330-21 Red/Green 12 520-301-20 Red 5/6 520-330-22 Red/Green 24 520-301-21-15 Red 12 520-330-22-15 Red/Green 24 520-301-22 Red 24 520-934-04 Blue 3.6 520-301-22-15 Red 24 520-934-21-15 Blue 12 520-314-22-50 Green 24 520-934-22 Blue 24 520-324-04 Green 3.5 520-934-22-15 Blue 24 520-324-04-15 Green 3.5 520-934-22-21 Blue 24 520-324-22 Green 24 520-934-23-15 Blue 24-28 520-324-22-15 Green 24 520-934-24 Blue 48 520-324-24 Green 48 520-998-04 Cold White 3.6 520-325-04 Yellow 2.1 520-998-21-15 Cold White 12 520-325-04-15 Yellow 2.1 520-998-22 Cold White 24 520-325-20 Yellow 5/6 520-998-22-50 Cold White 24 520-325-22 Yellow 24 520-998-23-15 Cold White 24-28 520-330-04-15 Red/Green 2.0/2.2 UNITS UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 033/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3