FEATURES PANEL INDICATOR LEDs - Ø8.0mm Mounting 411 SERIES PACK QUANTITY = 20 PIECES l Front panel replaceability l Must be used in conjunction with 907-000-00 panel l Domed fresnel lens for wide angle viewing l Sealed to IP40 l Product illustrated 411-532-22 in the 907-000-00 panel socket. See datasheet DS084/04 mounting socket SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 643 -0 ~ +85^ -0 ~ +85 λp Topr Tstg HIGH INTENSITY 411-501-21 Red Colour Diffused 12 20 11000 Yes 411-521-21 Yellow Colour Diffused 12 20 16000 591 -0 ~ +85^ -0 ~ +85 Yes 411-532-21 Green Colour Diffused 12 20 23000 527 -0 ~ +85^ -0 ~ +85 Yes 411-930-21 Blue Colour Diffused 12 20 7000 470 -0 ~ +85^ -0 ~ +85 Yes 411-997-21 Cold White Colour Diffused 12 20 14000 *see below -0 ~ +85^ -0 ~ +85 Yes 411-501-23 Red Colour Diffused 24-28 17.5 11000 643 -0 ~ +85^ -0 ~ +85 Yes 411-521-23 Yellow Colour Diffused 24-28 17.5 16000 591 -0 ~ +85^ -0 ~ +85 Yes 411-532-23 Green Colour Diffused 24-28 17.5 23000 527 -0 ~ +85^ -0 ~ +85 Yes 411-930-23 Blue Colour Diffused 24-28 17.5 7000 470 -0 ~ +85^ -0 ~ +85 Yes 411-997-23 Cold White Colour Diffused 24-28 17.5 14000 *see below -0 ~ +85^ -0 ~ +85 Yes Vdc mA mcd nm 0 UNITS 997F-C *Typical emission colour cold white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 C C 0 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS081/07 Issue 1 SAMPLES AVAILABLE Page 1 of 4 411 SERIES 22.0 5.1 4.2 Ø6.3 Ø7.0 Ø8.4 0.7 Sq 6.9 Key Dimensions in mm (Typical) Key denotes cathode Not to scale MATERIALS Body Nylon 6 Termination Pins Tin on Nickel Plated Phosphor Bronze Fresnel lens Polycarbonate Header Nylon 6 Rear Retainer Spring Steel Mounting Hardware Use with socket 907-000-00. Use wth socket 908-000-00 when diode test facility is specified TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM POWER DISSIPATION PANEL REVERSE CUTOUT VOLTAGE MINIMUM MOUNTING CENTRES MIN/MAX. PANEL THICKNESS 411 500 3 8.0 17.0 13.0 UNITS mW Vdc mm mm mm PANEL SOCKETS & CONNECTORS 909-000-00 is gold plated 910-000-00 is tin plated for use with 907 and 908 series panel sockets. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low Dimensions in mm (Typical) Not to scale resistance and gas tight electrical contact. 8.0 Rear Retainer Lens Body Termination 411 SERIES Washer MOUNTING HOLE Panel Socket 907 SOCKET Mounting hole to be clean and burr free How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 4 Optional Reverse Protection Diode ORDER CODE SUFFIX CIRCUIT COMMENTS 01 Available on all indicators except Bi-Colour devices and when diode test is specified. Optional Diode Test Facility ORDER CODE TERMINATION 03 3 PIN 908-000-00 Socket 09 1000mm of flying leads colours as shown (attached to 908-000-00) 04 3 PIN 908-000-00 Socket SUFFIX 05 CIRCUIT 150mm of flying leads colours as shown (attached to 908-000-00) 06 150mm of flying leads colours as shown (attached to 908-000-00) 10 1000mm of flying leads colours as shown (attached to 908-000-00) TEST POSITIVE TEST with Bi-colour LED Test Negative Cathode Test Not available NEGATIVE Test Positive Anode COMMENTS Anode Test Identification Cathode Identification Mark Mark De-rating Information 532, 930 & 997 501 521 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 4 411 Series Part numbers also available in the 411 Series: PART NO. COLOUR VOLTAGE PART NO. COLOUR VOLTAGE (Vdc) Vopr (Vdc) Vopr 411-000-22-50 Red/Yellow 24Vdc 411-509-22-03 Yellow 24Vdc 411-501-04 Red 20mA 411-509-22-04 Yellow 24Vdc 411-501-04-03 Red 20mA 411-509-22-05 Yellow 24Vdc 411-501-22 Red 24Vdc 411-509-22-52 Yellow 24Vdc 411-501-22-03 Red 24Vdc 411-509-23 Yellow 24-28Vdc 411-501-22-04 Red 24Vdc 411-512-20 Green 5/6Vdc 411-501-24 Red 48Vdc 411-512-21 Green 12Vdc 411-501-24-03 Red 48Vdc 411-512-21-04 Green 12Vdc 411-501-24-04 Red 48Vdc 411-512-22 Green 24Vdc 411-501-75 Red 110Vac 411-512-22-03 Green 24Vdc 411-501-75-03 Red 110Vac 411-512-22-04 Green 24Vdc 411-501-76 Red 230Vac 411-512-22-05 Green 24Vdc 411-503-20 Red 5/6Vdc 411-512-22-51 Green 24Vdc 411-503-20-03 Red 5/6Vdc 411-512-24-03 Green 48Vdc 411-503-21 Red 12Vdc 411-519-22 Blue 24Vdc 411-503-21-04 Red 12Vdc 411-519-22-03 Blue 24Vdc 411-503-22 Red 24Vdc 411-519-22-50 Blue 24Vdc 411-503-22-03 Red 24Vdc 411-521-22 Yellow 24Vdc 411-503-22-04 Red 24Vdc 411-521-22-03 Yellow 24Vdc 411-503-22-05 Red 24Vdc 411-521-22-04 Yellow 24Vdc 411-503-22-50 Red 24Vdc 411-521-24-04 Yellow 48Vdc 411-503-22-51 Red 24Vdc 411-521-76-13 Yellow 230Vac 411-503-23 Red 24-28Vdc 411-532-04 Green 20mA 411-503-24-03 Red 48Vdc 411-532-22 Green 24Vdc 411-503-76 Red 230Vac 411-532-22-03 Green 24Vdc 411-506-20-03 Orange 5/6Vdc 411-532-22-04 Green 24Vdc 411-506-22 Orange 24Vdc 411-532-24-03 Green 48Vdc 411-506-22-03 Orange 24Vdc 411-532-76 Green 230Vac 411-506-22-04 Orange 24Vdc 411-532-76-13 Green 230Vac 411-506-22-51 Orange 24Vdc 411-532-76-15 Green 230Vac 411-506-23 Orange 24-28Vdc 411-930-22 Blue 24Vdc 411-506-75 Orange 110Vac 411-930-22-03 Blue 24Vdc 411-506-76-15 Orange 230Vac 411-930-22-50 Blue 24Vdc 411-509-20 Yellow 5/6Vdc 411-997-22 White 24Vdc 411-509-21 Yellow 12Vdc 411-997-22-03 White 24Vdc 411-509-21-50 Yellow 12Vdc 411-997-43 White 18Vdc 411-509-22 Yellow 24Vdc 411-997-76 White 230Vac UNITS UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 4 of 4