FEATURES PROFESSIONAL LED INDICATORS Ø8.1mm Mounting 677 SERIES PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Sealed to IP67 l Wide viewing angle l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. l Smoked lens for good on/off contrast ratio SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 677-501-21 Red Smoked 12 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 677-521-21 Yellow Smoked 12 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 677-532-21 Green Smoked 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 677-930-21 Blue Smoked 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 677-997-21 Cool White Smoked 12 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes 677-501-23 Red Smoked 24-28 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 677-521-23 Yellow Smoked 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 677-532-23 Green Smoked 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 677-930-23 Blue Smoked 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 677-997-23 Cool White Smoked 24-28 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 051/06 Issue 2 SAMPLES AVAILABLE Page 1 of 3 677 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Termination Tags Silver Flash Coated Brass Fresnel lens Polycarbonate Encapsulation PC5430 Resin Lock Washer 925-000-00 is brass tin plated. For use with 677 series lamps. Spring Steel Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER REVERSE PANEL CUTOUT NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS MOUNTING MOUNTING PANEL 677 700 3* / 1000• 8.1 0.6 x,y = 14.5 1.5-13.0 UNITS mW Vdc mm Nm mm mm * = Current Version • = Voltage Version OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 051/06 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 532, 930 & 997 501 & 521 website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply MARL INTERNATIONAL LTD 2007 : DS 051/06 Issue 3 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3