FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 695 SERIES l Natural Anodised Aluminium PACK QUANTITY = 10 PIECES l Low profile styling, sunlight readable LEDs l Sealed to IP67 l Flying lead terminations available l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS WAVE INTENSITY LENGTH lv@20mA (mcd) λp (nm) OPERATING TEMP Topr STORAGE TEMP Tstg -40 ~ +95^ -40 ~ +100 HIGH INTENSITY 695-501-21 695-521-21 695-532-21 Red Smoked 12 20 11000 Green Smoked 12 20 23000 Yellow Smoked 12 20 16000 643 591 527 -40 ~ +95^ -40 ~ +95^ -40 ~ +100 -40 ~ +100 Yes Yes Yes 695-930-21 Blue Smoked 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 695-501-23 Red Smoked 24-28 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 695-997-21 695-521-23 695-532-23 695-930-23 695-997-23 UNITS Cool White Yellow Green Blue Cool White Smoked Smoked Smoked Smoked Smoked 12 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 mA 14000 16000 23000 7000 14000 mcd *see below -40 ~ +95^ 591 527 -40 ~ +95^ -40 ~ +95^ 470 -40 ~ +95^ nm °C *see below -40 ~ +95^ -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 °C Yes Yes Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 002/08 Issue 2 SAMPLES AVAILABLE Page 1 of 3 695 Series Mounting Hole + On rear of header denotes anode Dimensions in mm (Typical) Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Natural anodised aluminium Panel Seal Viton Nut Natural anodised aluminium Termination Brass to BS2874 CZ108 copper flash undercoat with silver flash finish Lock Washer Spring Steel Fresnel lens Polycarbonate Header Nylon 6 A82 Encapsulation PC5430 resin 925-000-00 is brass tin plated. For use with 695 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 695 MAXIMUM POWER DISSIPATION MAXIMUM REVERSE VOLTAGE PANEL CUTOUT mw Vdc mm 825 1000 12.7 NUT MOUNTING TORQUE MINIMUM MOUNTING CENTRES MIN/MAX. PANEL THICKNESS Nm mm mm 1.0 19.5 2.0-10.0 OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY VOLTAGE WIRE COLOUR WIRE LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 150mm NO/DIAMETER OF CONDUCTORS DIAMETER OVER INSULATION 19/0.15mm 1.2mm COMMENTS Customised lengths available 1000mm website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 002/08 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 532, 930 & 997 501 & 521 PART NO. COLOUR 695-501-20-15 Red 695-501-25-50 Red 695-501-22-52 695-501-25-51 695-501-25-52 695-501-42 695-501-58 695-501-72 695-501-74 695-509-22 Red Red Red Red Red Red Red Yellow PART NO. COLOUR 5/6Vdc 695-521-72 Yellow 110Vdc 695-532-25-50 Green VOLTAGE DC (Vdc) Vopr 24Vdc 110Vdc 110Vdc 15Vdc 70Vdc 24Vac Blue 110Vac 5/6Vdc 230Vac 695-521-58 Yellow 70Vdc Yellow Yellow 70Vdc 70Vdc Blue 110Vdc 695-521-58-19 695-930-20-15 Green 110Vdc 695-930-76 24Vdc Yellow UNITS 695-906-75 Green 110Vdc 110Vdc 695-521-25-50 Yellow 695-532-58-19 Green 48Vac Blue 110Vac 695-521-25-52 695-532-58 24Vac 695-930-25-50 Yellow Yellow 695-532-25-52 Yellow (Vdc) Vopr 48Vac 695-509-75 695-521-22-51 695-521-74 VOLTAGE DC 695-930-52-50 Blue 5Vdc 24Vdc 695-997-72 White 24Vac 110Vdc 695-997-76 White 230Vac 70Vdc 695-997-74 UNITS White 48Vac The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 002/08 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3