FEATURES PROFESSIONAL LED INDICATORS Ø8.1mm Mounting 614 SERIES Bi-colour l Black anodised aluminium housing l Sealed to IP67 l Flying lead terminations available on the Bi-colour l Dual state LED indicator saves panel space and reduces PACK QUANTITY = 10 PIECES assembly time. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE LENGTH λp (nm) OPERATING STORAGE TEMP TEMP Topr Tstg BI-COLOUR STANDARD INTENSITY 614-530-04 Red/Green Water Clear 2.0/2.2 20 30/20 627/565 -40 ~ +85^ -50 ~ +100 Yes 614-530-20 Red/Green Water Clear 5/6 15/20 30/20 627/565 -40 ~ +85^ -50 ~ +100 Yes 614-530-21 Red/Green Water Clear 12 20 30/20 627/565 -40 ~ +85^ -50 ~ +100 Yes 614-530-23 Red/Green Water Clear 24-28 20 30/20 627/565 -40 ~ +85^ -50 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. 530 ^ = Products must be derated according to the derating information - Fig 1 Refer to Fig 1 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 042/06 Issue 2 SAMPLES AVAILABLE Page 1 of 2 614 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by long pin. Mounting hole to be clean and burr free. Not to scale MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Termination Tags Tin Plated Phosphor Bronze Lens Polycarbonate Encapsulation PC5430 Resin Lock Washer 909-000-00 is gold plated. 910-000-00 is tin plated For use with 614 (Bi-colour) series lamps. Spring Steel Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL POWER CUTOUT DISSIPATION MOUNTING TORQUE MINIMUM MIN/MAX. CENTRES THICKNESS MOUNTING PANEL 614 700 8.1 0.6 x,y = 14.5 1.5-13.0 UNITS mW mm Nm mm mm OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 19 DC Products Red-anode / Black-cathode 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 042/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2