MEANWELL ES25A48-P1J

ES25A
20~25W AC-DC Single Output Desktop
series
Features :
Universal AC input / Full range
3 pole AC inlet IEC320-C14
Class power (with earth pin)
Full output 5~48V safety approval
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
PWM 3842 control circuit and regulated
LED indicator for power on
Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE
1 year warranty
TUV
Rheinland
Product Safety
SPECIFICATION
ORDER NO.
ES25A05-P1J ES25A07-P1J ES25A09-P1J ES25A12-P1J ES25A15-P1J ES25A18-P1J ES25A24-P1J ES25A28-P1J ES25A36-P1J ES25A48-P1J
SAFETY MODEL NO.
ES25A05-050 ES25A07-075 ES25A09-090 ES25A12-120 ES25A15-150 ES25A18-180 ES25A24-240 ES25A30-280 ES25A36-360 ES25A48-480
7.5V
9V
12V
15V
18V
24V
28V
36V
48V
RATED CURRENT
4.0A
2.93A
2.77A
2.08A
1.66A
1.38A
1.04A
0.89A
0.69A
0.52A
CURRENT RANGE
0.4 ~ 4.0A
0.3 ~ 2.93A 0.2 ~ 2.77A 0.1 ~ 2.08A
RATED POWER (max.)
20W
DC VOLTAGE
OUTPUT
geprUfre
Sicherheit
Note.2 5V
RIPPLE & NOISE (max.) Note.3 50mVp-p
0.1 ~ 1.66A 0.1 ~ 1.38A 0.1 ~ 1.04A 0.1 ~ 0.89A 0.06 ~ 0.69A 0.05 ~ 0.52A
22W
25W
25W
25W
25W
25W
25W
25W
25W
80mVp-p
80mVp-p
80mVp-p
100mVp-p
150mVp-p
180mVp-p
240mVp-p
240mVp-p
240mVp-p
VOLTAGE TOLERANCE Note.4
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
2.0%
SETUP, RISE, HOLD UP TIME 600ms, 50ms, 16ms at full load
90 ~ 264VAC 135 ~ 370VDC
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
47 ~ 63Hz
EFFICIENCY (Typ.)
70%
AC CURRENT
INRUSH CURRENT (max.)
0.7A / 100VAC
LEAKAGE CURRENT(max.)
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
72%
76%
76%
78%
80%
82%
82%
82%
82%
40A / 230VAC
0.75mA / 240VAC
130 ~ 180% rated output power
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Recovers automatically after fault condition is removed
0 ~ +50 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0~50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
WITHSTAND VOLTAGE
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 approved
EMS IMMUNITY
MTBF
DIMENSION
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
I/P-O/P:3KVAC , I/P-FG:1.5KVAC
SAFETY &
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
ISOLATION RESISTANCE
EMC
EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B
(Note. 7)
HARMONIC CURRENT
Compliance to EN61000-3-2,3
OTHERS
CONNECTOR
NOTE
PACKING
PLUG
500Khrs min. MIL-HDBK-217F(25 )
93*54*36mm (L*W*H)
250g ; 60pcs / 15kg / CARTON
Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested
CABLE
Standard type UL1185 6ft (with ferrite core) for stock ; Other type available by customer requested
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:ES25A-SPEC 2008-05-23
ES25A
20~25W AC-DC Single Output Desktop
Mechanical Specification
series
Unit:mm
UL1185 16AWG 1830 50mm for 5V
UL1185 18AWG 1830 50mm for 7.5 ~ 48V
70 10mm
POWER LED
C"+"
11 0.5mm
ID 2.1 x OD 5.5
NAME PLATE
Plug Assignment
36
93
Standard plug: P1J (option)
54
P1J
OUTPUT
+
Static Characteristics
Derating Curve
100
100
LOAD (%)
LOAD (%)
P/N
CENTER
70
0
10
20
30
Ta (
38
)
50
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:ES25A-SPEC 2008-05-23