P66A 24~66W AC-DC Single Output Desktop series Features : 3 pole AC inlet IEC320-C14 Class power (with earth pin) Full output 3~48V safety approval Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit Pass LPS for 16~48V LED indicator for power on Approvals: UL / CUL / CB 2 years warranty SPECIFICATION ORDER NO. P66A-0R1B P66A-1R1B P66A-1-1R1B P66A-2P2J P66A-3P2J P66A-4P2J P66A-5P2J P66A-6P2J P66A-7P2J P66A-8P2J SAFETY MODEL NO. DC VOLTAGE OUTPUT PSU66A-0 PSU66A-1 PSU66A-1-1 PSU66A-2 PSU66A-3 PSU66A-4 PSU66A-5 PSU66A-6 PSU66A-7 PSU66A-8 Note.2 3.3V 5V 7.5V 9V 12V 15V 18V 24V 30V 48V 8.50A 6.40A 5.55A 5.50A 4.40A 3.66A 2.75A 2.2A 1.37A 0 ~ 7.27A 0 ~ 8.50A 0 ~ 6.40A 0 ~5.55A 0 ~ 5.50A 0 ~ 4.40A 0 ~ 3.66A 0 ~ 2.75A 0 ~ 2.2A 0 ~ 1.37A 24W 42.5W 48W 50W 66W 66W 66W 66W 66W 66W 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p 5 ~ 6V 6 ~ 8V 8 ~ 11V 11 ~ 13V 13 ~ 16V 16 ~ 21V 21 ~ 27V 27 ~ 33V 33 ~ 48V RATED CURRENT 7.27A CURRENT RANGE RATED POWER RIPPLE & NOISE (max.) Note.3 50mVp-p 3 ~ 5V VOLTAGE ADJ. RANGE Fixed output by internal VR 6.0% 5.0% VOLTAGE TOLERANCE Note.4 6.0% 5.0% 5.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 4.0% 4.0% 4.0% 2.0% 2.0% 1.0% 1.0% 1.0% SETUP, RISE, HOLD UP TIME 1s, 50ms, 16ms at full load INPUT VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 65% AC CURRENT INRUSH CURRENT (max.) 1.5A / 100VAC LEAKAGE CURRENT (max.) 0.75mA / 240VAC 110 ~ 160% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVERLOAD PROTECTION OVER VOLTAGE EMC OTHERS 75% 78% 80% 82% 82% 82% 83% 40A / 230VAC 110 ~ 140% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. WORKING HUMIDITY 0 ~ +50 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1950, CSA22.2 approved I/P-O/P:3KVAC, I/P-FG:1.5KVAC I/P-O/P, IP/FG:100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B Compliance to EN61000-3-2,-3 HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING PLUG STANDARD TYPE CONNECTOR CABLE NOTE 75% IC1Tj135 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down SAFETY STANDARDS WITHSTAND VOLTAGE (Note. 7) 70% OVER TEMPERATURE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY & 135 ~ 370VDC STANDARD TYPE Compliance to EN61000-4-2,3,4,5,6,11, ENV50204, light industry level, criteria A 300khrs min. MIL-HDBK-217F(25 ) 147*75.5*43.2mm (L*W*H) 0.55kg ; 36pcs / 21kg / CARTON 3~8V R1B: DIN 5 Pin for stock; Other type available by customer requested 8~48V P2J: 2.1 * 5.5 * 11mm, center positive for stock ; Other type available by customer requested 3~8V AWM2464 18Awg*4c with shiell 4ft for stock see page 2; Other type available by customer requested 8~48V18Awg*2c SPT-1 6ft for stock see page 2; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:P66A-SPEC 2011-03-07 P66A 24~66W AC-DC Single Output Desktop Mechanical Specification series Unit:mm UL2464 18AWG 1230 50mm for 3.3V~7.5V 145 43.2 54.8 75.5 SWITCHING ADAPTOR 10.2 POWER LED 147 SPT-1 18AWG 1830 50mm for 9V~48V 145 43.2 75.5 SWITCHING ADAPTOR 11 POWER LED ID 2.1 x OD 5.5 147 Plug Assignment Standard plug: 8~48V P2J (option) Standard plug: 3~8V R1B (option) 11 PIN NO OUTPUT P2J 1 P/N OUTPUT CENTER + 45 5 2 4 3 o 1 ID 2.1 x OD 5.5 Derating Curve 2 COM 3 +Vout 4 COM 5 +Vout Static Characteristics 100 LOAD (%) 100 LOAD (%) COM 60 0 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:P66A-SPEC 2011-03-07