150W Single Output Switching Power Supply SC-150 series Features : AC input range selectable by switch Protections:Short circuit/Over load/Over voltage Charger for lead-acid batteries Built-in constant current limiting circuit Built-in temperature compensation circuit Alarm signal output(Optional) Fixed switching frequency at 25KHz 2 years warranty SPECIFICATION MODEL OUTPUT INPUT SC-150-13.5 SC-150-27 DC VOLTAGE 13.5V 27V SC-150-54 54V RATED CURRENT 11.2A 5.6A 2.8A CURRENT RANGE 0 ~ 11.2A 0 ~ 5.6A 0 ~ 2.8A RATED POWER 151.2W 151.2W 151.2W RIPPLE & NOISE (max.) Note.2 180mVp-p 240mVp-p 240mVp-p VOLTAGE ADJ. RANGE 12 ~ 15V 24 ~ 30V 48 ~ 56V VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% LINE REGULATION 0.3% 0.2% 0.2% LOAD REGULATION 0.3% 0.2% 0.2% SETUP, RISE, HOLD TIME 100ms, 50ms, 20ms at full load VOLTAGE RANGE 88 ~ 132VAC/176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz 248 ~ 370VDC EFFICIENCY (Typ.) 83% AC CURRENT INRUSH CURRENT (max.) 3.2A/115VAC 1.6A/230VAC COLD START 35A LEAKAGE CURRENT <3.5mA / 240VAC OVER LOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 86% 15.53 ~ 18.23V 31.05 ~ 36.45V 86% 62.1 ~ 72.9V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 4) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A MTBF 234.1K Hrs min. MIL-HDBK-217F (25 199*110*50mm (L*W*H) 0.8Kg; 16pcs/13.9Kg/0.95CUFT DIMENSION PACKING NOTE ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:SC-150-SPEC 2004-12-01 SC-150 150W Single Output Switching Power Supply Mechanical Specification Case No. 906 series Unit:mm 192 5 172 3.5 12 6 100 1 9.5 2 3 97 110 4 8.2 5 6 5-M3 37 7 199 6 3.5 M 25 3- 50 20 12 2 4 .5 1 6 .5 3 .5 6 .5 190.5 3 20 159 Terminal Pin. No Assignment Pin No. 1 2 3 4 Pin No. Assignment 5 AC/L 6 AC/N 7 FG PSF(Power Supply Foult) Assignment RTH(Thermistor) DC OUTPUT -V DC OUTPUT +V Derating Curve Static Characteristics (27V) OUTPUT VOLTAGE (V) 100 80 LOAD (%) 60 40 20 -10 -10 0 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 45 ) 60 55 (VERTICAL) (HORIZONTAL) 320 30 280 27 240 24 200 21 160 18 120 15 80 80 160 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 OUTPUT RIPPLE (mVp-p) Ta=25 33 130 260 INPUT VOLTAGE (V) File Name:SC-150-SPEC 2004-12-01