I&Q NETWORK IQM-3B-1000 750 to 1250 MHz / Excellent Phase and Amplitude Balance / Hi-Rel SMA Package B-Package Outline PRINCIPAL SPECIFICATIONS Model Number RF/LO Band- 90° Phase Center Freq. width, Accuracy fo , GHz MHz Typ., (Max) IQM-3B-1000 1.0 500 ±3° (±5°) GENERAL SPECIFICATIONS RF/LO Input Characteristics Impedance: VSWR: RF Power Level: LO Power Level: 50 Ω nom. 1.8:1 max. 0 dBm nom. +10 dBm nom. I & Q Output Characteristics Amplitude Balance:0.3 dB typ., 0.5 dB max. Video Bandwidth: DC to †100 MHz nom. Output Impedance:50 Ω nom. Conversion Loss: 10 dB typ,12 dB max. (RF to I or Q) Weight, nominal: 3 oz (84 g) Operating Temp: -- 55° to +85°C NOTES: 1. Tolerance on 3 place decimals ± .030(.75) except as noted. 2. Dimensions in inches over millimeters. Higher Freqs: † See IQM-4D series Video Bandwidth is typically much greater than 100 MHz General Notes: 1. I & Q networks are integrated networks that produce two quadrature phased, equal amplitude signals when fed RF and LO signals. 2. The IQM-3B-1000 wideband microwave I&Q network uses both lumped element and distributed circuit technologies to insure high performance in a flatpack design. 3. Merrimac I & Q Networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. 13Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531