I&Q NETWORK IQF-9L-500 30 to 1000 MHz / Ultra Wideband Suitable For Spread Spectrum / Hi-Rel Flatpack PRINCIPAL SPECIFICATIONS GENERAL SPECIFICATIONS Model Number LO/RF Bandwidth, MHz Phase Balance Amplitude Balance, dB IQF-9L-500 30 - 1000 90° ± 5° 0.5 General Notes 1. I & Q networks are integrated devices that produce two quadrature-phased, equal amplitude signals when fed by RF and LO signals. 2. In the IQF-9L, specially designed lead/lag circuits are used to provide superior performance across very wide bandwidths as is required in spread spectrum communications systems. 3. These units comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. RF and LO Input Characteristics Impedance: 50 Ω nom. VSWR: 1.3:1 typ. 1.7:1 max. RF Power Level: 0 dBm max. LO Power Level: +11.5 dBm nom.* I & Q Output Characteristics Video Bandwidth: DC to †100 MHz Two Tone, 3rd Order Input Intercept: +16 dBm typ. Output Impedance: 50 Ω nom. Conversion Loss (RF to I or Q): 10 dB typ., 12 dB max. Weight, nominal: 0.55 oz (15.4 g) Operating Temp: -- 55° to +85°C † Video Bandwidth is typically much greater than specified. *Higher LO Power versions available to special order. L - Package Outline NOTES: 1. Tolerance on 3 place decimals ± .010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Dimensions marked with * apply only at body. 4. All unmarked pins are case ground. Ground LO Input Ground Q Output RF Input I Output 13Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531