MERRIMAC PMP-3R-10B

PMP-3R Series
ANALOG PHASE MODULATOR
10 to 500 MHz / Up to 10% Modulation Rate / Low Insertion Loss / High Sensitivity / Meri-Pac
TM
PRINCIPAL SPECIFICATIONS
Model
Number
PMP-3R-***B
Center
Frequency,
fo, MHz
10 - 500
RF
Bandwidth
10% of fo
For complete Model Number replace ** with desired Center Frequency, fo in MHz.
General Notes:
1. The PMP-3R series of high frequency, voltage controlled phase modulators
covers 10 to 500 MHz. Phase modulation is achieved by the application of a DC
coupled signal between 0 and 15 volts and can have a rate up to 10% of the RF
center frequency when driven from a low impedance source.
2. The modulating signal varies the capacitance of two varactor diodes which form
part of a tuned LC circuit connected across the output ports of a 90° Quadrature
Hybrid. The resulting reactance changes cause a shift in the insertion phase of an
RF signal passed through the hybrid. A single unit provides more than 180° of
phase shift, peak-to-peak.
3. The PMP-3R series of voltage variable phase modulators are designed for
analog modulation of an RF carrier. For digital modulation, the JPP and BPP series
of quadrature and bi-phase modulators are suggested.
4. Merrimac Phase Modulators are designed for high reliability and can be supplied
screened to meet specific military and space applications.
Meri-Pac
 R-Package
NOTES:
1. Tolerance on 3 place decimals ± .010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Lead dimensions apply only at body.
4. All unmarked pins are case ground.
GENERAL SPECIFICATIONS
RF Characteristics
Impedance:
50 Ω
Phase Shift Range*: 0 to --180° min.@fo
Insertion Loss:
2.0 dB max.
Loss Variation vs. Vc: < 0.5 dB typ.
VSWR:
1.6:1 max.
Input Power:
0 dBm max.**
Modulation Characteristics
Impedance:
50 Ω
Control Voltage, Vc: 0 to +15 V p-p max.
Sensitivity:
0.2 Rad/Volt Avg.
Modulation Rate:
10% of fo max.
Weight, nominal:
0.32 oz. (9 g)
Operating Temp:
-- 55° to +85°C
*In addition to insertion phase
**Unit may be operated at +10 dBm in reduced
control range of 1.5 - 15 V (+30 V no damage)
Typical Transfer Characteristic
19Feb96
ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531