EASYBRAID CO. DESOLDERING BRAID 1 Easy Braid Co. is a manufacturer of desolder wick with an emphasis on continuing advancement in desoldering technology. Established in 1989, Easy Braid Co. quickly achieved widespread recognition in the rework/repair industry with its competitive pricing and innovative product line. With products, packaging, and flux technologies constantly changing—particularly in the development of water soluble and no-clean fluxes, fine pitch components and arrays—high quality and consistent performance is essential. By manufacturing in compliance with our uniform quality standards, and through our strict adherence to Statistical Process Control (SPC), Easy Braid Co. can assure you the highest quality products and guarantee the consistency of that quality. Easy Braid’s wick products are made using ultra fine, oxide-free copper braided into a weave configuration which maximizes thermal conduction and solder retention. Immediately after braiding, the wick is cleaned in an environmentally friendly process unique to Easy Braid Co. Every precaution is taken to ensure that the braid remains oxide-free until it is coated through our proprietary flux process. Our closed weave design requires less time for desoldering, thus minimizing lifted pads and thermal damage and absorbing up to 30% more solder mass. This enables an operator to get on and off a connection quickly, using less wick to accomplish the task. Likewise, Easy Braid Co. applies the same technologies to its stencil rolls for optimum cleaning while using the least amount of paper to absorb the most solder paste. Unlike other stencil roll manufacturers who re-spool readily available paper to fit various screen printers, Easy Braid Co. utilizes a paper that is specifically designed for maximum absorption of solder paste in a stencil-cleaning environment. Easy Braid utilizes the sales support and services of over 200 representatives located throughout the United States and in 20 additional countries spanning six continents. Our international sales base continues to grow and strengthen with each new Easy Braid advancement. QUICK BRAID Cleaner, Faster, More Consistent ONE•STEP Clean, Fast, Reliable • Oxide-free clean copper • More strands of copper (more surface area) per square inch • Designed to leave a residue which is environmentally safe • Uses pure type ‘R’ resin flux conforming to all the requirements of Mil-F-14256F, Type ‘R’ and ANSI/J-STD-004 • Available in static dissipative spools in compliance with the ESD Association Standard (Mil. Standard 2000 and ANSI/ESD S2020) • Manufactured under SPC guidelines • Cleaned and manufactured utilizing the latest technology in environmentally friendly chemicals and processes • Packaged in 5, 10, 25, 100 and 500 foot lengths • Oxide-free clean copper • More strands of copper (more surface area) per square inch • Flux residue remaining on board does not need to be cleaned • To be used in conjunction with processes using RMA type no-clean fluxes; conforms to the requirements of ANSI/J-STD-004, Type LO • High SIR—conforming to Bellcore specification GR-78-CORE (TR-TSY000078), and IPC Test Method III • Available in static dissipative spools in compliance with the ESD Association Standard (Mil. Standard 2000 and ANSI/ESD S2020) • Manufactured under SPC guidelines • Cleaned and manufactured utilizing the latest technology in environmentally friendly chemicals and processes • Packaged in 5, 10, 25 and 100 foot lengths SEA BRAID Ready to use with the flux of your choice • Oxide-free clean copper • More strands of copper (more surface area) per square inch • Can be used in conjunction with any flux to fit your process • Coated to prevent oxidation • Available in static dissipative spools in compliance with the ESD Association Standard (Mil. Standard 2000 and ANSI/ESD S2020) • Manufactured under SPC guidelines • Cleaned and manufactured utilizing the latest technology in environmentally friendly chemicals and processes • Packaged in 5, 10, 25 and 100 foot lengths QUICK BRAID ONE•STEP SEA BRAID Desoldering Braid No-Clean Desoldering Braid Unfluxed Desoldering Braid PART NO. WIDTH COLOR PART NO. WIDTH COLOR PART NO. WIDTH COLOR Silver Gold Green Blue Brown S-A-5 S-B-5 S-C-5 S-D-5 S-E-5 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown Silver Gold Green Blue Brown S-A-5AS S-B-5AS S-C-5AS S-D-5AS S-E-5AS .025" .050" .075" .100" .125" Silver Gold Green Blue Brown Silver Gold Green Blue Brown S-A-10 S-B-10 S-C-10 S-D-10 S-E-10 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown Silver Gold Green Blue Brown S-A-10AS S-B-10AS S-C-10AS S-D-10AS S-E-10AS .025" .050" .075" .100" .125" Silver Gold Green Blue Brown Silver Gold Green Blue Brown S-A-25 S-B-25 S-C-25 S-D-25 S-E-25 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown Silver Gold Green Blue Brown S-A-100 S-B-100 S-C-100 S-D-100 S-E-100 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown 5 FT. SPOOLS Q-A-5 Q-B-5 Q-C-5 Q-D-5 Q-E-5 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown OS-A-5 OS-B-5 OS-C-5 OS-D-5 OS-E-5 .025" .050" .075" .100" .125" Q-A-5AS Q-B-5AS Q-C-5AS Q-D-5AS Q-E-5AS .025" .050" .075" .100" .125" Silver Gold Green Blue Brown OS-A-5AS OS-B-5AS OS-C-5AS OS-D-5AS OS-E-5AS 5 FT. SPOOLS (ANTI-STATIC) .025" .050" .075" .100" .125" 10 FT. SPOOLS Q-A-10 Q-B-10 Q-C-10 Q-D-10 Q-E-10 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown OS-A-10 OS-B-10 OS-C-10 OS-D-10 OS-E-10 .025" .050" .075" .100" .125" Q-A-10AS Q-B-10AS Q-C-10AS Q-D-10AS Q-E-10AS .025" .050" .075" .100" .125" Silver Gold Green Blue Brown OS-A-10AS OS-B-10AS OS-C-10AS OS-D-10AS OS-E-10AS .025" .050" .075" .100" .125" 25 FT. SPOOLS Q-A-25 Q-B-25 Q-C-25 Q-D-25 Q-E-25 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown OS-A-25 OS-B-25 OS-C-25 OS-D-25 OS-E-25 .025" .050" .075" .100" .125" 100 FT. SPOOLS Q-A-100 Q-B-100 Q-C-100 Q-D-100 Q-E-100 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown Q-A-500 Q-B-500 Q-C-500 Q-D-500 Q-E-500 .025" .050" .075" .100" .125" Silver Gold Green Blue Brown OS-A-100 OS-B-100 OS-C-100 OS-D-100 OS-E-100 .025" .050" .075" .100" .125" 500 FT. SPOOLS With One Step, flux residue remaining on the board does not need to be cleaned. Sea Braid is designed to be dipped in an OA water-soluble flux. After desoldering, the connection must be cleaned according to the manufacturer’s recommendations. DESOLDERING BRAID 10 FT. SPOOLS (ANTI-STATIC) All sizes available in static dissipative spools. 50 foot spools available upon request. www.easybraidco.com | Toll Free 1-800-840-5394 | Toll Free Fax 1-800-840-9805 2 DESOLDERING BRAID ONE•STEP LF No-Clean Lead-Free Braid • Formulated with a flux designed for higher activation temperatures • Tight oxide-free copper weave enables quick “on and off” desoldering • More copper surface area per square inch of wick provides extra thermal shock protection to the circuit • Concentrated fine copper braiding utilizes less length of wick for each desoldering application • Lead-Free Braid neither contains or is manufactured with any substances that violate the RoHS directive ONE•STEP LF No-Clean Lead-Free Braid PART NO. WIDTH COLOR 5 FOOT SPOOLS (ANTI-STATIC) LF-A-5AS .025" Silver LF-B-5AS .050" Gold LF-C-5AS .075" Green LF-D-5AS .100" Blue LF-E-5AS .125" Brown STENCIL ROLLS Material Designed Specifically for SMT Screen Printers STENCIL ROLLS • Less down time, less change over time, and less inventory required • Material adaptable for all vacuum and non-vacuum machines • High strength, even when wet • Exceptionally low lint levels • Solvent resistant and highly absorbent • Excellent in both wet and dry applications • Custom stencil rolls available upon request 3 PART NO. WIDTH / CORE LENGTH MAKE REPLACES OEM ROLL & MACHINE TYPE CORE LENGTH CORE ID ROLL LENGTH EB41M1855 445/457/41 mm MPM P1485 AP & UP Series 3000 18" 18" .75" 55' EB41M1818-1 2348/457/41 mm MPM P2348 AP Series 18" 1.0" 47' EB41M1812 305/457/41 mm MPM P2112 AP Series 18" .75" 55' EB41M2424 600/609/41 mm MPM MPM AP36 24" .75" 55' EB41M1809 223/457/41 mm MPM AP17, 21, 25, 27 UP 2000 18" .75" 55' EB41M0909 223/457/41 mm MPM AP17, 21, 25, 27 9" .75" 55' EB41M2222 550/559/41 mm MPM UP 3000 22" 22" .75" 55' EB41D1818 265/455/41 mm DEK DEK 260A #128034 18" .75" 39' EB41D2112 265/305/41 mm DEK 265 Series 12" .75" 39' EB41D2120 265/530/41 mm DEK 265 Series GS #129051 21" .75" 39' EB41D2121 265/540/41 mm DEK DEK265 #112239 21.25" .75" 39' EB41D2116 265/400/41 mm DEK DEK 265 GS/GSX/288 Horizon Infinity 21" .75" 39' EB41E1212 300/41 mm EKRA E4, E5 12" .5" 33' EB41E1616 400/41 mm EKRA E4, E5 16" .5" 33' EB41E2020 500/41 mm EKRA E4, E5 20" .5" 33' EB41E2424 600/41 mm EKRA E4, E5 24" .5" 33' EB41S1616 410/410/41 mm SMTECH SMT Quad 16" 1.5" 39' EB41S2120 520/520/41 mm SMTECH SMT Quad 20" 1.5" 39' EB41P1414 PGI 360/41 mm Panasonic GI Series 14.18" 1.5" 40' EB41P1414-118 PGI 360/41 mm Panasonic GI Series 14.18" 1.5" 118' EB41P1616 PGI 410/41 mm Panasonic GI Series 16" 1.5" 40' EB41P1616-108 PGI 410/41 mm Panasonic GI Series 16" 1.5" 108' EB41P2121 PGI 540/41 mm Panasonic GI Series 21.25" 1.5" 40' EB41P2821 MSS Panasonic MSS 28" 1.5" 45' EB41F1919 495/495/41 mm Fuji Fuji GSP 19.5" 1.0" 33' HAND CLEANER WIPES • Hands are cleaned quickly and effectively • Pleasant citrus scent • Very effective on stains such as solders, greases, and glues • Ideal for production line use IPA / DI WIPES • 70% Isopropyl alcohol, 30% de-ionized water • General-purpose sterile cleaner that can be used through entire production process • Leaves surfaces free of contamination • Evaporates quickly after cleaning has been completed PART NO. DESCRIPTION STANDARD PACKAGE EB41W44 Lint Free Stencil Wipe 4" x 4" 1200 EB41W99 Lint Free Stencil Wipe 9" x 9" 300 EB41W1212 Lint Free Stencil Wipe 12" x 12" 150 EBHC100 Hand Cleaner Wipes (100 wipes per tub/6 tubs per case) 1 case EBSC100 Stencil Cleaner Wipes (100 wipes per tub/6 tubs per case) 1 case EBIPA100 IPA/DI Wipes (100 wipes per tub/6 tubs per case) 1 case EBHC15 Hand Cleaner Wipes Pack 15 EBSC15 Stencil Cleaner Wipes Pack 15 EBIPA15 IPA/DI Wipes Pack 15 WIPES STENCIL CLEANER WIPES • Formulated for the removal of stencil contaminants • Evaporates quickly to leave surfaces clean and dry • Odor-free • Removes contaminates cleanly and without scratching the stencil surface SPECIALTY CLEANER FLUX REMOVER ENVIRONMENTAL CLEANERS / DEGREASERS K44Y16 K30Y14 K51G13 NatureSafe Air (13 oz.) Non-corrosive, water based, biodegradable, solvent free, ozone safe, non-flammable, unique internal dispensing system K52G16 NatureSafe Spray (16 fl.oz.) Biodegradable, nonflammable, ozone safe, pump, unique internal dispensing system Stencil Cleaner (16 fl.oz.) No residue, safe on most plastics, pump Flux-Away (14 oz.) No residue, safe on most plastics, ozone safe, adjustable aerosol pressure spray nozzle www.easybraidco.com | Toll Free 1-800-840-5394 | Toll Free Fax 1-800-840-9805 CHEMICALS CHEMICALS 4 SOLDER SOAKERS™ Sponges Designed Specifically for Electronics • Soldering iron tips cleaned quickly and efficiently • Custom die-cut sponges available (minimum quantity 2,500) • Available in standard packages of 10 or 1,000 sponges SOLDER SOAKERS S1227-O 5 S2235-O S3219-O S4017-O S1525-O S2626-S S3444-S S2626-M PART NO. SIZE USAGE S1227-O S1525-O S1716-P S1821-P S1836-M S2026-S S2222-O S2235-O 1.2" x 2.7" 1.55" x 2.55" 1.7" x 1.6" 1.8" x 2.1" 1.8" x 3.6" 2.0" x 2.6" 2.2" x 2.2" 2.2" x 3.5" S2235-S S2235-M S2432-O S2432-M S2626-P S2626-S 2.2" 2.2" 2.4" 2.4" 2.6" 2.6" x x x x x x 3.5" 3.5" 3.2" 3.2" 2.6" 2.6" S2626-O S2626-M S2745-S S3017-O S3020-P S3020-S S3219-O S3234-O S3417-O S3444-S S3444-O S4017-O S8517-P 2.6" 2.6" 2.7" 3.0" 3.0" 3.0" 3.2" 3.2" 3.4" 3.4" 3.4" 4.0" 8.5" x x x x x x x x x x x x x 2.6" 2.6" 4.5" 1.7" 2.0" 2.0" 1.9" 3.4" 1.7" 4.4" 4.4" 1.7" 17" OK 45803S Ungar 9901; Weller SP60 Replacement sponges for Easy Braid small soldering iron stand Replacement sponges for Easy Braid large soldering iron stand With multiple holes Plato CS-11; Weller MP With center hole Hexacon Thermotrac 1001, 1002; Micro Mini M65, M70; Dial A Temp1520, 1524; Plato CS-36, Weller DS-100, EC-1000, EC-2000 Same as S2235-O above with slits instead of hole Same as S2235-O with multiple holes With center hole With multiple holes Same as S2626-S with plain smooth top instead of slits Hakko 927, 928, 936; Plato CS-10; Virtual VS2626; Weller WTCP; EC-3000, EC-4000; Weller TC205 Same as S2626-S with a center hole instead of slits Same as S2626-S with multiple holes instead of slits Plato CS-33; Weller EC-1000, EC-2000 With center hole With plain smooth top With slits Metcal; Plato CS-46 Add a “T” suffix to Part No. when ordering 10 Pack With center hole Add an “M” suffix to Part No. With center hole when ordering 1,000 Pack Hexacon 810, 812, 890, 891, 892 Modification: Same as S3444-S with a hole instead of slits “S” = Slits “O” = One Hole Hakko 926, Plato CS-43; OK15495(S)5 “M” = Multiple Holes “P” = Plain Smooth Top Sponge sheet SWABS Swabs for Electronic Cleaning Applications REF. PART NO. 10 PACK PART NO. 50 PACK PART NO. 100 PACK TIP DESCRIPTION SHAFT DESCRIPTION A SW2PF-10 SW2PF-50 SW2PF-100 Foam tip; 3/16" D x 19/32" L 2" Solid B SW3PF-10 SW3PF-50 SW3PF-100 Foam tip; 3/16" D x 11/16" L 3" Solid C SW3WF-10 SW3WF-50 SW3WF-100 Foam tip; 3/16" D x 11/16" L 3" Wood D SW5PF-10 SW5PF-50 SW5PF-100 Rectangular foam tip; 9/16" D x 15/16" L 5" Solid E SW5PFA-10 SW5PFA-50 SW5PFA-100 Foam Tip; 91% Isopropyl alcohol, 9% H2O 5" Semi-saturated F SW5PFAS-10 SW5PFAS-50 SW5PFAS-100 Anti-stat foam tip; 3/16" D x 11/16" L 5" Anti-static solid G SW5PFR-10 SW5PFR-50 SW5PFR-100 Round foam tip; 29/32" D x 1-1/8" L 5" Solid H SW6BPF-10 SW6BPF-50 SW6BPF-100 Foam tip; 3/8" D x 1" L 6" Blue solid I SW6PF-10 SW6PF-50 SW6PF-100 Foam over cotton tip; 3/16" D x 15/16" L 6" Solid J SW6PFAS-10 SW6PFAS-50 SW6PFAS-100 Anti-stat foam tip; 3/16" D x 11/16" L 6" Anti-static solid K SW6PFG-10 SW6PFG-50 SW6PFG-100 Large foam tip; 3/8" D x 1" L 6" Solid L SW6WC-10 SW6WC-50 SW6WC-100 Cotton tip; 3/16" D x 5/8" L 6" Wood M SW6WF-10 SW6WF-50 SW6WF-100 Foam tip; 3/8" D x 13/16" L 6" Wood N SW6WFAS-10 SW6WFAS-50 SW6WFAS-100 Anti-stat foam tip; 3/16" D x 11/16" L 6" Wood O SW6WFCAS-10 SW6WFCAS-50 SW6SFCAS-100 Anti-stat foam over cotton tip; 3/8" D x 13/16" L 6" Wood www.easybraidco.com | Toll Free 1-800-840-5394 | Toll Free Fax 1-800-840-9805 SWABS • Can be utilized with most electronic cleaning solvents • Only virgin materials used • Low contamination and lint levels used • Packaged in anti-static material • Available in convenient packages (10, 50 or 100 per package) • Durable, high strength shafts 6