GEB-4800-IC 10/100/1000 Ethernet 48-Port Blade 48-Port 10/100/1000 Ethernet Blade The GEB-4800-IC port blade supports 10 Megabit, 100 Megabit, and 1 Gigabit Ethernet speeds. Each port blade can accept 48 RJ-45 (CAT5) cables directly. Incoming copper signals can be routed out to SFP port cards (Models SFPB-4800-IC and SFPB-4800-RJ-IC) for media conversion to optical. The GEB-4800-IC supports auto speed negotiation and auto cable re-wiring. Features • Up to 48 RJ-45 Ports per each GEB-4800-IC blade System Design • Compatible with Opticomm's LinxView™ software The GEB-4800-IC, when used with the Optilinx™ OLX-3000, enables high-speed switching between all 48 ports (duplex multicasting is not possible). Each port can accommodate an RJ-45 connection. Up to 3 blades can be inserted in any Optilinx™ OLX-3000 Mainframe, enabling up to 144 Ports (4RU switch), or 288 connections (using 6 blades), via the 8RU switch. • Up to 3 Blades (or 144 ports) in a space-saving 4RU package • Up to 6 Blades (or 288 ports) in a space-saving 8RU package • Ruggedized Assembly • Enhanced Flexibility • Easy Inventory Control • Reduced Down-Time Sample Configuration MADE IN THE USA 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without prior notice.