OptiLinx™ OLX-3000 4.25 Gb/s 144-Port Optical Switch High-Speed Optical Switching Between Ports The OptiLinx™ OLX-3000 is a versatile, multi-purpose, non-blocking transparent optical switch that provides highspeed switching between ports with minimal effect on overall network latency. The OLX series is capable of switching digital signals up to 4.25 Gb/s with any of its ports. Both a 4RU 144 port version and 8RU 288-port version are available. For smaller applications, see the 16-port OLX-1000 series. System Design The OptiLinx™ OLX-3000 is designed to accept up to three modular port cards with up to forty-eight Small Form-Factor Pluggable (SFP) transceiver modules per port card. Each SFP transceiver module provides the physical ports for one inputoutput pair. Different types of SFP transceivers support a variety of network configurations: • 2.5, 2.125, 1.25 and 1.0625 Gb/s and 4.25 Gb/s link rates available • 865, 1310 and 1550 Gb/s optical media (contact Opticomm for CWDM & DWDM wavelengths) • Links up to 80 km The OptiLinx™ OLX-3000 comes equipped with hot-swappable power supplies, fans and port cards to allow users to quickly replace parts without affecting system performance. The OptiLinx™ OLX-3000’s controlling software and non-volatile configuration data resides on the module. Remote Configuration and Easy Testing OLX-3000 configuration commands are sent via a 10/100 Ethernet connection using simple intuitive command sets. With regard to network testing, some of the most significant capabilities are: • Automatic and Remote Reconfiguration and Fault Emulation Quickly establish links, emulate optical power breaks with and without path failures, make topology changes, and re-route point-to-point, loop or multicast connections. • Dynamic Device Testing Features • Remote monitoring and switching using Opticomm’s LinxView™ software • Up to 288-port versions available • Full Duplex switching capacity up to 612 Gb/s • Hot-pluggable SFP transceivers on all port cards • Port cards, power supplies and fans are hot-swappable for maximum flexibility • Opticomm’s LinxView™ software allows the user to build configurations by dragging and dropping ports • Provides point-to-point, multiple loops, and multicast topologies simultaneously Through out-of-band control the switch can simulate faults; also, the capability exists to identify improperly operating devices. • Increased Resource Sharing Capabilities Switched connectivity between local or remote -- up to 50 km -facilities and between devices allows testing without physically moving equipment. • Cable and Hardware Diagnostics Quickly isolate interconnect problems; investigate whether the network can provide reliable data transfer over specified distances without touching cables; and test hardware configurations such as hubs. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Optical Switching, Routing and Redundancy Hardware Specifications Dimensions Weight Storage temperature Operating temperature Humidity Data rates With handles and mounting ears: 19.05” W x 7.0” H x 17.72” L (484 mm by 178 mm by 450 mm) Rack Mount: 17.13” W x 7.0” H x 15.75” L (435 mm by 178 mm by 400 mm) 43 lbs. (19.5 kg) -40° C to +85° C -10° C to +60° C 10% to 90% (non-condensing) Up to 4.25 Gbps per port (port card dependent) Optiva™ Configurable Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Sample Configuration Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA