OptiLinx™ OLX-1000 16-Port Optical Switch High-Speed Optical Switching Between Ports The OptiLinx™ OLX-1000 is a versatile, multi-purpose, non-blocking transparent optical switch that provides highspeed switching between ports with minimal effect on overall network latency. The OLX series is capable of switching digital signals up to 3.2 Gbps with any of its 16 ports, all in a compact 1RU chassis. System Design The OptiLinx™ OLX-1000 is designed to accept up to two modular port cards with up to eight Small Form-Factor Pluggable (SFP) transceiver modules per port card. Each SFP transceiver module provides the physical ports for one inputoutput pair. Different types of SFP transceivers support a variety of network configurations: Remote Configuration and Easy Testing • Up to 3.2 Gbps per port • 865, 1310 and 1550 Gbps optical media (contact Opticomm for CWDM & DWDM wavelengths) • Links up to 80 km The OptiLinx™ OLX-1000 saves space with an internal power supply. The OptiLinx™ OLX-1000’s controlling software and non-volatile configuration data resides on the module. OLX-1000 configuration commands are sent via a 10/100 Ethernet connection using simple intuitive command sets. With regard to network testing, some of the most significant capabilities are: • Automatic and Remote Reconfiguration and Fault Emulation Quickly establish links, emulate optical power breaks with and without path failures, make topology changes, and re-route point-to-point, loop or multicast connections. • Dynamic Device Testing Features • Remote switching and multicasting using a Command Line Interface • Up to 16 ports in a space-saving 1RU package • Full Duplex switching capacity up to 51 Gbps • Hot-pluggable SFP transceivers on all port cards • Port cards, power supplies and fans are hot-swappable for maximum flexibility • Provides point-to-point, multiple loops, and multicast topologies simultaneously Through out-of-band control the switch can simulate faults; also, the capability exists to identify improperly operating devices. • Increased Resource Sharing Capabilities Switched connectivity between local or remote facilities and between devices without physically moving equipment. • Cable and Hardware Diagnostics Quickly isolate interconnect problems; investigate whether the network can provide reliable data transfer over specified distances without touching cables; and test hardware configurations such as hubs. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Optical Switching, Routing and Redundancy Optiva™ Configurable Hardware Specifications Dimensions Weight Storage temperature Operating temperature Humidity Data rates Total bandwidth 6.3” x 9.2” (SFPB blade, in inches) 0.85 lbs. (without SFP modules) -40° C to +85° C -10° C to +70° C 0% to 95% (noncondensing) Up to 3.2 Gbps per port (port card dependent) 51 Gbps Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Sample Configuration Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA