OLC-2500 Optiva 4-Port Wavelength Converter (Preliminary) ™ Optiva™ 4-Port Optical Wavelength Converter (Preliminary) Optiva™ Configurable Communication Platform The OLC-2500 enables the easy conversion of wavelengths for advanced optical networking. System Design Network Management SDI & HD-SDI Composite Video, Audio & Data Port 1 The purposes of optical wavelength conversion would include WDM, CWDM, and DWDM integration and/or re-boosting optical signals for additional optical budget capabilities. The OLC-2500 can be situated in any Optiva™ enclosure and will accommodate up to four (4) Small Form Pluggable (SFP) lasers at data rates of up to 2.5Gbps. Only Opticomm approved SFPs should be used to ensure proper receive matching and system compliance. Each insert card comes with a label identifying the specific vital information. Port 2 Status Alert RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Port 3 CATV/RF & L-Band Port 4 Optical Switching, Routing & Redundancy Passive Multiplexing Solutions OLC-2500 Enclosures, Racks & Frames Power Supplies & Accessories Features • SFP Compatible • Up to 2.5 Gbps per port • Up to 4-Port Optical Wavelength Conversion • Compatible with OptivaView™ SNMP Management Suite • Stand-Alone or Rack-Mount • Compatible with MDM-7000 Series for WDM and CWDM Multiplexing MADE IN THE USA 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice