RGB-4004A/B Single Fiber VGA (RGB H/V) w/Stereo Audio VGA Video Extender w/Stereo Audio for High Resolution Connectivity to Remote Systems The RGB-4004 is a single-fiber, laser-based extender offering VGA (RGB H/V) video with stereo audio. It features precision color calibration, uncompressed signal transport, and auto-negotiation, creating an optimal experience. The RGB-4004 Series is ideal for higher resolution video applications such as digital video editing suites, CAD/CAM graphics workstations, LCD/plasma public display screens, video projectors, military C3/C41 systems, and theaters or stadiums. Rack-Mount This single fiber system simplifies cabling infrastructures and provides visual LED indicators for power, optical link, video activity, signal error, system status, monitor detection and optical signal presence. Stand-Alone Features System Design • Optical transport of Analog VGA video and Stereo audio Sync on green, separate HS/VS. All units come as either rack-mount (1RU) or stand-alone versions. The 1RU rack-mount version includes an internal 110/220V universal power supply while the standalone version comes with an external 12VDC power supply. • Requires only one multimode or singlemode optical fiber • Supports distances up to 2.5 km over multimode and 65 km over singlemode • Auto-negotiation with precision color calibration • True DC restoration with AGC • Flat frequency response Versions Available • Complies with RS-170, RS-170A & RS-343 EIA Standards • RGB-4004A 1280 x 1024 @ 75Hz • No EMI or RFI and no ground loops • RGB-4004B 1600 x 1200 @ 75Hz • Sync on green, separate HS/VS • Rack-Mount (1RU) or Stand-Alone versions available 1310 Receiver Sensitivity Optical Budget Loss Range* Conn Type Mode Laser MM L1 50 /125µ -8 dBm -22 dBm 16 dB 1 km ST Laser MM L1 62.5/125µ -8 dBm -24 dBm 16 dB 2 km ST Laser SM L2 09/125µ -4 dBm -22 dBm 18 dB 25 km FC Laser SM L3 09/125µ 0 dBm -20 dBm 20 dB 40 km FC Laser SM L4 09/125µ 0 dBm -20 dBm 20 dB 40-65 km FC 1550 1270-1610 Type Fiber Type Output Power Wavelength Suffix (CWDM) • • • • • * Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type Analog VGA 75 Ω .7 volt peak to peak, 1 volt with sync 10 Hz to 300 MHz @ -3dB < 1.0 % typical < 2.0 % typical ± 1.1 % typical < 0.5 % typical 93.8 KHz 1280 x 1024 (option A), 1600 x 1200 (option B) @ 75 Hz >60 dB using RS-250C standards @ 1 km HD15 Pin female 1 stereo @ 24 bits 600Ω or 47kΩ - balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz @ -3dB > 90 dB @ 1 kHz (weighted) < 1.0 %, 1 KHz at maximum modulation 1/8” stereo jack General Dimensions Material Operating temperature Storage temperature Humidity Operating voltage NetworkManagement Management Network SDI HD-SDI SDI and & HD-SDI CompositeVideo, Video, Composite Audio& &Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data(Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF& &L-Band L-Band CATV/RF Audio Channels Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type ™ ™ Multi-Signal Optiva Optiva Configurable Transmission Platform Communication Platform 1RU Rack Mount: 19” L X 7.25” W X 1.75” H Stand Alone: 6.25” L X 6.13” W X 1.75” H Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 85-265 VAC 50/60Hz @ 15W OpticalSwitching, Switching,Routing Routing Optical & Redundancy & Redundancy PassiveMultiplexing Multiplexing Passive Solutions Solutions Enclosures,Racks Racks Enclosures, Frames & &Frames PowerSupplies Supplies Power and Accessories & Accessories Diagnostics Status monitoring Front panel LED indicators Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration