RGB-4004-A/B/C Single Fiber RGB/VGA & Stereo Audio Digital VGA/RGB Video For Ultra-High Resolution Remote Display Digital VGA/RGB Video For Ultra-High Resolution Remote Display with Stereo Audio. The RGB-4004 is a single-fiber, LED or Laser-based VGA-H/V RGB/Video modem and utilizes digital transmission over one fiber. It boosts performance with precise color management, reduced fiber handling and self-configuration. Rack-Mount It is ideal for the extension of any high resolution Video signal such as a CAD/CAM graphics workstation, plasma display screens, LCD/DLP projectors, military C3 and C41 systems, theaters and stadiums. The RGB-4004 simplifies cabling infrastructures and has LEDs for Power, Optical link, Video activity, Signal error, System status, Monitor detection and Optical signal status. Stand Alone Features RGB-4004 Options • Digital VGA/Video High resolution RGB/Video • RGB-4004A 1280 x 1024 x 75Hz 1.25Gb/s • Multimode or singlemode operation over single • RGB-4004B 1600 x 1200 x 75Hz 2.30Gb/s fiber, reducing fiber handling from 5-to-1 fiber • RGB-4004C 1800 x 1440 x 75Hz 3.11Gb/s • Distance of 1.0 km over multimode and 65 km over singlemode System Design Sync on green, separate HS/VS, or composite. All units come as a Stand Alone version. Units can be rack-mountable with optionally provided brackets for a flat surface such as a desk top in a cabinet, or mounted in a 19” Rack Shelving. RGB-4004 unit comes with external 8-24 VDC power supply. • Self-configuring, precision color transmission • True DC restoration with AGC • Flat frequency response • Complies with RS-170, RS-170A & RS-343 EIA standards • No EMI or RFI and no ground loops • Stand Alone or Mounting Brackets 1310 Receiver Sensitivity Optical Budget Loss Range* Conn Type Mode Laser MM L1 50 /125µ -8 dBm -22 dBm 14 dB 1 km ST Laser MM L1 62.5/125µ -8 dBm -24 dBm 16 dB 2 km ST Laser SM L2 09/125µ -4 dBm -22 dBm 18 dB 25 km FC Laser SM L3 09/125µ 0 dBm -20 dBm 20 dB 40 km FC Laser SM L4 09/125µ 0 dBm -20 dBm 20 dB 40-65 km FC 1550 1270-1610 Type Fiber Type Output Power Wavelength Suffix (CWDM) • • • • • * Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type Analog RGB Format 75 Ω .7 volt peak to peak, 1 volt with sync 10 Hz to 300 MHz @ -3dB < 1.0 % typical < 2.0 % typical ± 1.1 % typical < 0.5 % typical 93.8 KHz 1280 x 1024 (option A), 1600 x 1200 (option B) 1800 x 1440 (option C) @ 75 Hz >60 dB using RS-250C standards @ 1 km HD15 Pin female Audio Channels Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type Material Operating temperature Storage temperature Humidity Operating voltage Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy 1 stereo @ 24 bits 600Ω or 47kΩ - balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz @ -3dB > 90 dB @ 1 kHz (weighted) < 1.0 %, 1 KHz at maximum modulation Phone Jack Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Power Supplies Supplies Power and Accessories & Accessories General Dimensions Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform 1RU Rack Mount: 19” L X 7.25” W X 1.75” H Stand Alone: 6.25” L X 6.13” W X 1.75” H Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 85-265 VAC 50/60Hz @ 15W Diagnostics Status monitoring LED indication Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration 1 Fiber RGB-4004/XMT RGB-4004/RCV