RGB-4006A/B Single Fiber VGA/RGB, Stereo Audio Duplex Data & Keyboard/Mouse VGA Video Extender w/Stereo Audio, Duplex Data and Keyboard/Mouse for High Resolution Connectivity to Remote Systems The RGB-4006 is a single-fiber, laser-based KVM extender offering VGA (RGB H/V) video, stereo audio, RS-232 duplex data and keyboard/mouse. It features precision color calibration, uncompressed video stream, and auto-negotiation, creating an optimal remote computing experience. Rack-Mount The RGB-4006 Series is ideal for higher resolution video applications such as digital video editing suites, CAD/CAM graphics workstations, LCD/plasma public display screens, video projectors, military C3/C41 systems, and theaters or stadiums. This single fiber system simplifies cabling infrastructures and provides visual LED indicators for power, optical link, video activity, signal error, system status, monitor detection and optical signal presence. System Design All units come as either rack-mount (1RU) or standalone versions. The 1RU rack-mount version includes an internal 110/220V universal power supply while the stand-alone version comes with an external 12VDC power supply. Stand-Alone Features • Optical transport of Analog VGA video, Stereo audio and duplex RS-232 Serial data. • Requires only one multimode or singlemode fiber • Supports distances up to 2.5 km over multimode and 65 km over singlemode cable • Auto-negotiation with precision color calibration • True DC restoration with AGC • Flat frequency response Versions Available • Complies with RS-170, RS-170A & RS-343 EIA Standards • RGB-4006A 1280 x 1024 @ 75Hz • No EMI or RFI and no ground loops • RGB-4006B 1600 x 1200 @ 75Hz • Sync on green, separate HS/VS • Rack-Mount (1RU) or Stand-Alone versions available 1310 Receiver Sensitivity Optical Budget Loss Range* Conn Type Mode Laser MM L1 50 /125µ -8 dBm -22 dBm 16 dB 1 km ST Laser MM L1 62.5/125µ -8 dBm -24 dBm 16 dB 2 km ST Laser SM L2 09/125µ -4 dBm -22 dBm 18 dB 25 km FC Laser SM L3 09/125µ 0 dBm -20 dBm 20 dB 40 km FC Laser SM L4 09/125µ 0 dBm -20 dBm 20 dB 40-65 km FC 1550 1270-1610 Type Fiber Type Output Power Wavelength Suffix (CWDM) • • • • • * Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type Analog VGA 75 Ω .7 volt peak to peak, 1 volt with sync 10 Hz to 300 MHz @ -3dB < 1.0 % typical < 2.0 % typical ± 1.1 % typical < 0.5 % typical 93.8 KHz 1280 x 1024 (option A), 1600 x 1200 (option B) >60 dB using RS-250C standards @ 1 km HD15 Pin female Audio Channels Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type 1 stereo @ 24 bits 600Ω or 47kΩ - balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz @ -3dB > 90 dB @ 1 kHz (weighted) < 1.0 %, 1 KHz at maximum modulation 1/8” stereo jack Data RS-232 Keyboard/Mouse 19.2 Kb/s DB9 Pin Male Mini-DIN 6 pin Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Power Supplies Supplies Power and Accessories & Accessories General Dimensions Material Operating temperature Storage temperature Humidity Operating voltage Rack-Mount (1RU): 19” L X 7.25” W X 1.75” H Stand-Alone: 6.25” L X 6.13” W X 1.75” H Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 85-265 VAC50/60 Hz @ 100 mA Diagnostics Status monitoring Sample Configuration Front panel LED indicators Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA