RGB-9100 160 MHz Hi-Resolution RGB/Video 160 MHz 3-Fiber Transmission System For Ultra High Resolution Remote Displays The RGB-9100 is a Amplitude Modulated (AM), LEDor Laser-based RGB Video transmission system, with Sync accepted on all on three channels. It is ideal for the extension of any high resolution Video signal such as a CAD / CAM graphics workstation. Units come with a built-in Automatic Gain Control (AGC) to maintain constant Video output for each color, and a status indicator for Power On. System Design All units come in a small module or Insert Card version. The cards can be inserted into our 18 slot, 19" rack-mountable card cage (CC-18), or one of our smaller Desktop Card Racks (DTCR series). The Desktop Card Racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. They can sit on a flat surface as a larger Stand Alone unit, or can be surface mounted with the flanges provided. Each one of our card housings operates with an appropriate power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 85-265 VAC. Features • Ultra-high resolution (1792 x 1536) • Multimode operation over three fibers • 160 MHz video bandwidth • Ideal for radar applications • True DC restoration • Flat frequency Response • Complies with RS-170, RS-170A & 343 EIA standards • No EMI or RFI and no ground loops • Stand Alone or Rack Mount • Ideal for CAD/CAM workstation extensions 865 1310 • • • 1550 Type Mode Wavelength Suffix LED MM L0 LED MM L1 Output Power Receiver Sensitivity Optical Loss Budget Range* Conn Type 50 /125µ -13 dBm -20 dBm 7 dB 1 km ST 62.5/125µ -10 dBm -20 dBm 10 dB 2 km ST 50 /125µ -8 dBm -20 dBm 12 dB 5 km ST Fiber Type * Chromatic dispersion and additional losses should be taken into account 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Vibration Shock Optiva™ Configurable 75 Ω 1 volt peak to peak, 0.7 volts without sync 10 Hz to 160 MHz @ -3dB < 2.0 % typical < 2.0° typical ± 1.1 % typical ≤ 0.5 % typical 128 KHz 120 KHz >52 dB using RS-250C standards @ 1 km BNC Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band Stand Alone (SA): 7.16” L x 5.21” W x 0.94” H 30 oz Insert Card (IC): 6.3” L x 0.8” W x 4.0” H 16 oz -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 12 VDC (200 mA) or 24 VAC (300mA) or 110/220 VAC Up to 5 g's Up to 12 g's Diagnostics Status monitoring Communication Platform Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories LED indication MADE IN THE USA Sample Configuration