OPTICOMM FMV-567

FMV-567
Simplex V/2D
One-way (FM) Video and Two Data
Transmission System
The FMV-567 is a simplex Video
transmission system with two simplex
Audio ports, ideal for CCTV cameras
and traffic surveillance. Status
indicators on Video, Sync, Data, carrier
detect, voltage, temperature, and
optical levels are monitored via LEDs.
Video
Audio
System Design
All of our units come as an Insert Card
version. The cards can be inserted into
our 18-slot, 19” rackmountable card
cage (CC-18-80W), or one of our smaller
Desk Top Card Racks (DTCR series).
Data
The Desk Top Card Racks can handle
one, two, four, or seven cards, allowing
for greater flexibility and future
expansion. They can sit on a flat
surface as a larger stand-alone unit, or
can be surface mounted with the
flanges provided. Each one of our card
housings operates with an appropriate
power supply. The regulated switching
power supply has short circuit
protection and an input operating
voltage of 87- 264 VAC.
865
1310
1550
●
Type
Mode
Wavelength
Suffix
LED
MM
L0
Features
• Multimode or singlemode operation over one fiber
• 8 MHz video bandwidth
• True DC restoration
• Flat frequency response
• Complies with RS-170 and RS-170A EIA video standards
• Compatible with NTSC, PAL and SECAM
• No EMI or RFI and no ground loops
• Stand Alone or Rack Mount
• Ideal for CCTV cameras andtraffic surveillance
Fiber
Type
50 /125µ
Output
Power
Receiver
Sensitivity
Optical
Loss
Budget
Range*
Conn
Type
-16 dBm
-34 dBm
18 dB
3 km
ST
-16 dBm
-34 dBm
18 dB
4 km
ST
62.5/125µ
●
LED
●
MM
L1
50 /125µ
62.5/125µ
●
●
●
Laser
SM
L2
09/125µ
-10 dBm
-36 dBm
24 dB
25 km
FC
Laser
SM
L3
09/125µ
-10 dBm
-36 dBm
24 dB
40 km
FC
* Chromatic dispersion should be taken into account.
52
800-867-8426 • [email protected] • www.opticomm.com • Contact factory for higher requirement.
CCTV Security
Networking
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
Tilt
Compatibility
Signal to noise ratio
FM carrier frequency
Connector type
Data
Data rate
Bit error rate
Data formats available
Connector type
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Vibration
Shock
Diagnostics
Status monitoring
75 Ω
1 volt peak to peak, 1.5 volts max
5 Hz to 8 MHz @ -3dB
< 1.0 % typical
< 1.0° typical
± 1.1 % typical
≤ 0.5 % typical
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
70 MHz
BNC
Selection Guide
Digital Broadcast
AM/IM Analog
SWFM
SWFM Analog
Analog
Analog-to-Digital
RGB Video
Datacom
RF CATV
DC to 300 Kbps
10-9
Async Rs-232, RS-422, RC-485/2W, Glenlock, Manchester,
20 mA current loop, TTL, or six Contact Closures
Hi-density 15 pin DB9 (DE15)
Stand Alone (SA): 7.16” L x 5.21” W x .94” H
39 oz
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
16 oz
-40° C to +74° C
-55° C to +85° C
0 to 95% non-condensing
12 VDC (200 mA) or 9-24 VAC (300mA) or 110/220 VAC
Up to 5 g's
Up to 12 g's
Appendix
Opticomm
reserves the
right to change
product
specifications
without notice.
LED indicator
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety:
UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
Sample Configuration
53