Oscilent Corporation IF SAW Filter | 813-IF70.0M-BA Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF70.0M-BA 13.3 x 6.5 SMD Base Station & Repeater May 02 2003 . TYPE : 70.0 MHz Bandpass Filter 9.0 MHz Bandwidth PART NUMBER : 813-IF70.0M-BA . Horizontal : 2.0 MHz/Div Veritical : 10 dB/Div Horizontal : 1.0 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 70.0 - MHz Insertion Loss - 22.2 24.0 dB 1dB Bandwidth - 9.00 - MHz 3dB Bandwidth 9.30 9.33 - MHz 40dB Bandwidth - 10.67 11.00 MHz Passband Ripple - 0.8 1.5 dB Group Delay Variation - 70 150 nsec Absolute Delay - 1.59 - µsec Substrate Material - LT - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if70_0ba.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 813-IF70.0M-BA Page 2 of 2 L1 = 150nH C1 = 56pF L2 = 369nH C2 = 62pF Source/Load Impedance = 50 ohms Part No.: 813-IF70.0M-BA Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_813_if70_0ba.htm 12/28/2005