Oscilent Corporation IF SAW Filter | 813-IF71.25M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF71.25M-A 13.3 x 6.5 SMD Base Station & Repeater Jan. 01, 2007 . TYPE : 71.25 MHz Bandpass Filter 12.1 MHz Bandwidth PART NUMBER : 813-IF71.25M-A . FREQUENCY RESPONSE Horizontal : 3.0 MHz/Div Veritical : 10 dB/Div Horizontal : 2.0 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 71.20 71.25 71.30 MHz Insertion Loss - 21.5 24.0 dB 1dB Bandwidth 11.6 12.0 - MHz 3dB Bandwidth 12.1 12.5 - MHz 40dB Bandwidth - 14.9 15.4 MHz Passband Ripple - 0.7 1.0 dB Group Delay Variation - 50 100 nsec Phase Linearity - 5.7 7.0 deg Substrate Material - LN - - Ambient Temperature - 25 - °C Center Frequency * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-IF71.25M-A Page 2 of 2 L1 = 56nH - - L2 = 100nH - - Source/Load Impedance = 50 ohms Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 813-IF71.25M-A