VDSL Hybrid / Filter Module ELECTRONICS INC. EPB5118G & EPB5118G-RC • • • • • Designed for CO side application Optimized for Long and Short Haul Solutions Add “-RC” after part number for RoHS Compliant Robust construction for IR processes Isolation: 1500 Vrms Electrical Parameters @ 25°C Cut-off Frequency (MHz) Insertion Loss (dB Max.) Lower Band Upper Band 1.0-2.5 MHz BF1 0.9 3.4 BF2 4.1 7.9 Return Loss (dB Min.) 4.5-6.3 MHz 1.0-2.5 MHz -2.5 --- --- -2.5 Attenuation (dB Min.) 4.5-6.3 MHz @ 0.2 MHz -12 --- --- -12 Common Mode Rejection (dB Min.) @ 3.4 MHz @ 4.1 MHz @ 40 MHz 0.3-100 MHz 0.1-2.5 MHz 4.5-100 MHz -50 --- -20 -30 -40 -40 -40 -50 -20 --- -50 Package Schematic 1.360 (34.54) 24 PCA EPB5118G(-RC) Date Code .740 (18.80) .900 (22.90) Chip Side 1 BPF2 40 Ω 2 .090 (2.29) .100 (2.54) .130 (3.30) Pin 1 I.D. Crosstalk (dB Min.) 14 (TIP) 100 Ω 13 24 270 Ω 23 Pad Layout 1 Cable Side BPF1 13 (RING) 12 All unused pins-gnded 1.100 (27.94) .050 (1.27) .010/.015 (.254/.381) .280 (7.11) .035 (.889) .100 (2.54) .016/.022 (.406/.559) .008/.012 (.203/.305) 0°-8° .860 (21.84) Notes : EPB5118G EPB5118G-RC SnPb Hot Tin Dip (Sn) † 1. Lead Finish 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information 245°C (Tube) (Tape & Reel) MSL = 4 (72 Hours, ≤30°C/60%RH) 4.77 grams 4.77 grams 15 pieces/tube 15 pieces/tube TBD pieces/13” reel TBD pieces/13” reel † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5118G & -RC Rev. 2 6/7/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com