10Base-T Interface Module ELECTRONICS INC. EPE6166S & EPE6166S-RC • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) @ 100 KHz, 20 mVrms Cable Side 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz 30-100 MHz 1-10 MHz Xmit Xmit Xmit Xmit Xmit Xmit Xmit Between Channels 140 -1 -15 -7 -18 -30 -35 -30 -30 • Cut-off Frequency : 17 MHz ± 1, Ref. @ 5 MHz • Characteristic Filter Impedance : Xmit 52 Ω, Rcv 100 Ω • Package Schematic .540 (13.72) Receive .055 (1.40) .150 (3.81) .095 (2.41) PCA EPE6166S(-RC) Date Code .270 (6.86) .420 (10.67) 1:1 16 1 Chip 2 Side 3 Suggested Solder Pad Layout 15 Cable Side 14 Transmit .030 (.762) .350 (8.89) .010/.015 (.254/.381) .240 (6.10) 1: .050 (1.27) 7 Pole LPF Chip Side 10 Cable Side 9 8 .008/.012 (.203/.305) 0°-8° 2 11 6 7 .050 (1.27) .016/.022 (.406/.559) .035 (.889) .150 (3.81) .370 (9.40) Notes : EPE6166S EPE6166S-RC SnPb Hot Tin Dip (Sn) † 1. Lead Finish 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) 245°C MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) TBD grams TBD grams TBD pieces/tube TBD pieces/13” reel TBD pieces/tube TBD pieces/13” reel (*EPE6166STR) (*EPE6166STR-RC) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6166S & -RC Rev. C1 9/14/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com