Fiber to 10Base-T Interface Module ELECTRONICS INC. EPE6284G & EPE6284G-RC • Optimized for Micro Linear ML4664 • Robust construction allows for the toughest reflow processing • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) (Typ.) Xmit/Rcv 1-10 MHz 5-10 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz @ 200 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -5/-5 -10/-10 -16/-16 -40/-40 -30/-30 ---/--- -30/-30 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) Isolation : Meets or exceeds 802.3 IEEE Requirements • Characteristic Filter Impedance : 100 Ω • Package Schematic Chip Side .980 (24.89) 1 .100 (2.54) .100 (2.54) .140 (3.56) Crosstalk (dB Min.) UTP Side 2:1 15 16 2 LPF 3 Pin 1 I.D. PCA EPE6284G(-RC) Date Code .390 (9.91) .540 (13.72) Pad Layout 6 14 1:1 7 .700 (17.78) .040 (1.02) .020 (.508) .245 (6.22) 11 9 LPF 10 8 .008/.012 (.203/.305) 0°-8° .035 (.889) .016/.022 (.406/.559) .500 (12.70) .100 (2.54) Non-Cumulative Notes : 1. Lead Finish EPE6284G EPE6284G-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 1.8 grams 1.8 grams 19 pieces/tube 550 pieces/13” reel 19 pieces/tube 550 pieces/13” reel (*EPE6284GTR) (*EPE6284GTR-RC) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6284G & -RC Rev. Orig2 10/30/06 JD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com