10/100Base-TX Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPF8143SE & EPF8143SE-RC • Recommended for Enable EL40C331, Broadcom BCM5201, BCM5202 & Level One LXT970 when connected per appropriate schematic • Designed to operate from -40°C to +85°C @ 8 mA DC Bias • Complies with or exceeds IEEE 802.3 & ANSI X3.263 Standards • Add “-RC” after part number for RoHS Compliant • Peak Solder Rating (see Note 2) Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C 100 KHz, 0.1 Vrms 8 mA DC Bias Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 0.1-100 MHz 150 MHz 1-30 MHz 60 MHz 100 MHz 1-30 MHz 30-100 MHz 100-500 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv -1/-1 -3/-3 -18/-18 -12/-12 -10/-10 -40/-40 -35/-30 -10/-10 350 µH • Isolation : 1500 Vrms • Package Schematic .055 (1.40) .050 (1.27) PCA .270 EPF8143SE(-RC) (6.86) Date Code -35 Impedance : 100 Ω • Rise Time : 3.0 nS Max. • .490 (12.45) .070 (1.78) 1-100 MHz .420 (10.67) Transmit Channel Suggested Solder Pad Layout 1 16 2 15 3 Pin 1 I.D. 14 1CT:1CT .030 (.762) .350 (8.89) .010/.015 (.254/.381) .190 (4.83) Receive Channel .008/.012 (.203/.305) 0°-8° 6 11 7 10 8 9 1CT:1CT .035 (.889) .016/.022 (.406/.559) .050 (1.27) .380 (9.65) Notes : 1. Lead Finish EPF8143SE EPF8143SE-RC SnPb Hot Dipped Sn or SAC 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 260°C MSL = 4 (72 Hours, ≤30°C/60%RH) 0.912 grams 0.912 grams 40 pieces/tube 40 pieces/tube 650 pieces/13” reel 650 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8143SE & -RC Rev. 3 3/11/08 JGD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com