10/100Base-TX Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPF8115G & EPF8115G-RC • Guaranteed to operate with 8 mA DC Bias at 70°C • Robust construction to meet IR/VP soldering processes • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 100 KHz, 0.1 Vrms 8 mA DC Bias 1-100 MHz 100-150 MHz 1-30 MHz 30-60 MHz 60-80 MHz 80-100 MHz 30-100 MHz 200 MHz 300-500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -3/-3 -18/-18 -14/-14 -12/-12 -10/-10 -35/-35 -15/-20 -10/-10 • Isolation : 1500 Vrms • Package Schematic Pin 1 I.D. .560 (14.22) Transmit Channel .092 (2.34) .100 (2.54) .140 (3.56) .390 (9.91) 12 CT Pad Layout .700 (17.78) .008/.013 (.203/.330) 0°-8° 10 TX+ 1CT:1CT CT 14 .030 (.762) .010/.015 (.254/.381) 11 TX- TD- 15 TD+ 16 .247 (6.27) -50 Impedance : 100 Ω • Rise Time : 3.0 nS Max. • .980 (24.89) PCA EPF8115G(-RC) Date Code 1-100 MHz Receive Channel RD+ 1 7 RX+ .035 (.889) .017/.022 (.432/.559) .500 (12.70) .100 (2.54) RD- 2 1CT:1CT 5 CT CT 3 Notes : EPF8115G 1. Assembly Process (Solder Composition) SnPb 6 RX- EPF8115G-RC Pb-Free + (RoHS exemption 7a) 2. Peak Solder Rating 225°C (per IPC/JEDEC J-STD-020C) 3. Moisture Sensitive Levels (MSL) MSL = 3 (per IPC/JEDEC J-STD-020C) MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) 1.85 grams 1.85 grams 19 pieces/tube 550 pieces/13” reel 19 pieces/tube 550 pieces/13” reel (*EPF8115G-TR) (*EPF8115G-RCTR) 4. Weight 5. Packaging Information (*Add “TR” to end of part number when placing order) 260°C (Tube) (Tape & Reel) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8115G & -RC Rev. A2 7/27/05 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com