PHIHONG PSA65U-150

WWW.PHIHONG.COM
60 Watt Universal Switching Adapter
PSA65U Single Output Series
Features
• High Efficiency
• Class B EMI
Applications
• Portable Equipment
• Peripherals
Safety Approvals
•
•
Non-vented/Spill-proof Case
IEC320 C14 Grounded Input
•
•
Notebook Computers
Networking
• cUL/UL
• CE
Mechanical Characteristics
• Length: 150.5mm (5.9in)
• Width: 70.5mm (2.8in)
Output Specifications
•
•
TUV
Meeting Cal. Prop. 65
•
•
Height: 39mm (1.5in)
Weight: 550g (20oz.)
Model
PSA65U-120
PSA65U-150
PSA65U-180
PSA65U-240
DC Output
Voltage
+12V
+15V
+18V
+24V
Load
Min.
0A
0.1A
0A
0A
Max.
5A
4A
3.3A
2.5A
Ripple (1)
P-P (max.)
120mV
150mV
180mV
240mV
Regulation
Line & Load
±5%
±5%
±5%
±5%
(1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 Mhz.
Phihong is not responsible for any error and change. Please consult the factory and visit www.phihong.com for the most
up-to-date specifications.
PSA65U Characteristics
INPUT:
WWW.PHIHONG.COM
AC Input Voltage Rating
Over-current Protection
100 to 240VAC
Output equipped with short circuit protection – auto
restart
AC Input Voltage Range
90 to 264VAC
Short Circuit Protection
Output can be shorted without damage
AC Input Frequency
47 to 63Hz
ENVIRONMENTAL:
Tempeature
Input Current
1.5A (rms) Max. @ 115VAC
0.8A (rms) Max. @ 230VAC
Operation
Non-operation
0 to +40°C
-30 to +70°C
Humidity
Leakage Current
Operation
8 to 90%
3.5mA Max.
Emissions
Inrush Current (cold)
30A for 115VAC at Max. load
60A for 230VAC at Max. load
(Cold start @ ambient 25°C)
FCC Class B
EN55022 Class B
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000VAC for 1 minute, 10mA
OUTPUT:
Efficiency
DC Output Connector
80% typical
2.1x5.5mm Center Positive Standard
Hold-up Time
16mS Min. @ 120VAC and Max. load
Over-voltage Protection
>130% over-voltage detection, adapter will be shut down
Dimension Diagram Unit: mm