WWW.PHIHONG.COM 30 Watt Universal 3-Wire Input Adapter PSC30U-V Adapter Series Meets EISA and ENERGY STAR Requirements PRELIMINARY Features • Low Cost • EISA Energy Efficient Compliance • ENERGY STAR EPS2.0 Compliance Applications • Portable Equipment • Peripherals Safety Approvals • • • Non-vented/Spill-proof Case Low Profile Design Class B EMI • • Networking Gaming Machines • cUL/UL 60950-1 • TUV 60950-1 • CE Mechanical Characteristics • Length: 116.5mm (4.59in) • Width: 55mm (2.17in) Output Specifications • • SAA C-Tick Model PSC30U-120V PSC30U-240V PSC30U-480V DC Output Voltage +12V +24V +48V • • Load Min. Max. 0A 2.5A 0A 1.25A 0A 0.625A Height: 31.5mm (1.24in) Weight: 250g (8.82oz.) Ripple (1) P-P (max.) 120mV 240mV 240mV Regulation Line Load ±5% ±5% ±5% Efficiency Level (1) Measured with using 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSC30U-V Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Over-current Protection 100 to 240VAC Output equipped with short circuit protection – auto restart AC Input Voltage Range 90 to 264VAC Short Circuit Protection Output can be shorted without damage AC Input Frequency 47 to 63Hz ENVIRONMENTAL: Temperature Input Current 0.8A (rms) max. @ 115VAC 0.4A (rms) max. @ 230VAC Operation Non-operation 0 to +40°C -30 to +85°C Humidity Leakage Current Operation 5 to 90% 3.5mA Max. Emissions Inrush Current (cold) 30A for 115VAC at max. load 60A for 230VAC at max. load (Cold start @ ambient 25°C) Input Power Saving 0.3W maximum at no load OUTPUT: Efficiency > 83.5% average efficiency Hold-up Time 10mS Min. @ 120VAC and Max. load Over-voltage Protection Output shuts down and recovers after reset AC power Dimension Diagram Unit: mm FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test Primary to Secondary: 1500VAC for 1 minute, 10mA