Pomona® Part Number 1326-A-60 1326-C-60 Schematic 2 1 Model 1326 Double Banana Plug One End Only Cable Type Twisted Pair RG58C/U FEATURES: • This double banana plug cable is designed to be used with all standard .166” (4mm) diameter banana jacks. • These jacks are usually spaced at .75” (19mm) apart. Pomona’s double banana plugs can be used with most digital multimeters that have the common and volt-ohm jacks at the standard spacing. • This cable is also suited for use with power supplies that have binding post outputs • The Pomona Banana Plug is well known for durability and reliability. • We take considerable pride in the materials and workmanship that go into this plug. Diameter Impedance .250” (6,35 mm) .195” (4,95 mm) 50 Ohms Length 60” (152,4 cm) 60” (152,4 cm) • The one-piece Beryllium Copper leaf spring with hard nickel plating is swaged into the solid brass banana plug body. MATERIALS: The plug is insert molded with black polypropylene (1326-C-). The plug is insert molded with gray polypropylene (1326A-). RATINGS: Operating Temperature: +55° C (+131° F) Max. 1326-A 300VAC/424VDC 1326-C 500VRMS ORDERING INFORMATION: Model 1326 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d1326_1_01.doc PomonaACCESS 90503 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1