ECO-PACTM 2 Single Phase Rectifier Bridge PSB 100F IdAV VRRM trr with fast Recovery Epitaxial Diode (FRED) + Preliminary Data Sheet PS VRSM VRRM Type VDSM VDRM (V) (V) 400 400 PSB 100F/04 600 600 PSB 100F/06 ~ L9 ~ K10 EG - Symbol Test Conditions I*dAV IFSM TC = 85 °C, (per module) 100 A TVJ = 45 °C t = 10 ms (50 Hz), sine 600 A VR = 0 t = 8.3 ms (60 Hz), sine 660 A TVJ = TVJM t = 10 ms (50 Hz), sine 540 A VR = 0 t = 8.3 ms (60 Hz), sine 590 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1800 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1810 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 1450 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1440 A²s -40... + 150 150 °C °C -40... + 125 °C 3000 V∼ ∫ i2 dt TVJ TVJM Tstg VISOL Maximum Ratings 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Md Mounting torque Weight typ. 3600 V∼ 1.5 - 2.0 14 - 18 22 Nm lb.in. g t=1s (M4) Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 2.5 mA VR = VRRM, TVJ = 25°C ≤ 0.65 mA IF = 60 A, TVJ = 25 °C ≤ 1.35 V VF VTO rT RthJC RthJK Characteristic Value For power-loss calculations only per diode; DC per module per diode; DC per module IRM = 100 A = 400 - 600 V = 35 ns IF=130A; -diF/dt=100A/µs; VR=100V 1.09 V 4.3 mΩ 0.85 0.21 1.0 K/W K/W K/W 0.25 K/W typ. 4.0 A typ. 35 ns Features • • • • • • Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • Supplies for DC power equipment Input and output rectifier for high frequency Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) L=0.05 mH; TVJ= 100°C trr IF=1A; -diF/dt=200A/µs; VR=30V; TVJ= 25°C ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 9.45 50 mm mm m/s² Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20