Subassembly Single Phase AC Controller Subassemblies PSW1C50 IRMS = 50 A VRRM= 800-1600 V Preliminary Data Sheet V RSM V DSM (V) 900 1300 1500 1700 VRRM Type VDRM (V) 800 PSW1C 50/08 1200 PSW1C 50/12 1400 PSW1C 50/14 1600 PSW1C 50/16 Symbol Test Conditions I RMS ITRMS ITAVM ITSM TC = 85°C; 50-400Hz (per phase) 50 A TVJ = TVJM 36 A 23 A TC = 85 °C; 180° sine TVJ = 45 °C t = 10 ms (50 Hz), sine 520 A VR = 0 t = 8.3 ms (60 Hz), sine 570 A TVJ = 125 °C t = 10 ms ∫ i dt 2 (50 Hz), sine 460 A VR = 0 t = 8.3 ms (60 Hz), sine 500 A TVJ = 45 °C t = 10 ms (50 Hz), sine 1350 A²s VR = 0 t = 8.3 ms (60 Hz), sine 1350 A²s (50 Hz), sine 1050 A²s t = 8.3 ms (60 Hz), sine 1030 A²s 150 A/µs TVJ = 125 °C t = 10 ms VR = 0 (di/dt)cr Maximum Ratings TVJ = 125 °C repetitive, IT = 150 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.3 A non repetitive,IT = ITAVM 500 A/µs diG/dt=0.5A/µs (dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs Features • • • Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • Solid state relays Advantages • • • • Space and weight savings Improved temperature and power cycling capability High power density Small and light weight RGK= ∞, method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg Weight TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W 0.5 W 10 V -40... + 125 125 °C °C -40... + 125 8 °C g typ. tP=300µs Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 Subassembly Symbol Test Conditions Characteristic Value ID,I R VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ IT = 80 A, ≤ 1.65 V 0.85 V 11 mΩ TVJ = 25 °C For power-loss calculations only VD=6V 5 mA TVJ= 25°C ≤ 1.0 V TVJ=-40°C ≤ 1.6 V ≤ 100 mA IGT VD=6V TVJ= 25°C TVJ=-40°C ≤ 150 mA VGD IGD IL TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 5 mA TVJ= 25°C, tP=10µs, VD=6V ≤ 200 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 150 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs TVJ= TVJM; IT=20A; tp=200µs;di/dt=-10A/µs typ. 150 µs IG=0.3A, diG/dt=0.3A/µs IH tgd IG=0.3A, diG/dt=0.3A/µs tq VR=100V; dv/dt=15V/µs; VD=2/3VDRM RthJC a per Thyristor; DC per module Max. allowable acceleration 1.1 0.55 50 K/W K/W m/s² Package style and outline Dimensions in mm (1mm = 0.0394“) 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20