Flat/Flush Shaft Type Rotary DIP Code Switches RDS10-112 RDS10-122 RDS10-132 RDS16-112 RDS16-122 RDS16-132 FEATURES Fully sealed construction Kinked tails hold switch to PC board during soldering Binary decimal (10 positions) & hexadecimal (16 positions), real & complimentary codes Flat/Flush type rotor styles SPECIFICATIONS Current rating & voltage Non-switching: 125 mA, 30V CD Switching: 125 mA, 30V DC Contact resistance 100mΩ max. Dielectric withstanding voltage 250V AC for 1 minute Insulation resistance 1,000 MΩ min. at 250V DC Durability 20,000 actuations Position 10 and 16 Operating temperature -25ºC ~ +85ºC Product specifications contained herein may be changed without prior notice. t is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Flat/Flush Type Shaft Rotary DIP Code Switches MATERIAL Insulator Glass-filled polymide Contact Copper alloy, selective gold plating over nickel Rotor control Polyacetal Rotor switch element Glass epoxy, gold plating over nickel Solvents: Acceptable Isopropyl alcohol Trichlene (Trichlorethylene) Ethyl alcohol Chlorothene (Trichloroethane) Toluene Freon (Trichlorotrifuoroethane) Solvents: Not Acceptable Acethone Methanol Benzine Part Number Knob Type Description Number of Positions RDS10-112 Flat/Flush Shaft BCD Real Code 10 RDS10-122 Flat/Flush Shaft BCD Complement 10 RDS10-132 Flat/Flush Shaft EECO - BCD Real Code 10 RDS16-112 Flat/Flush Shaft Hexadecimal 16 RDS16-122 Flat/Flush Shaft Hexadecimal Complement 16 RDS16-132 Flat/Flush Shaft EECO - Hexadecimal 16 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085