RECTRON FM4032W SEMICONDUCTOR TECHNICAL SPECIFICATION SURFACE MOUNT SILICON RECTIFIER VOLTAGE 3200 Volts CURRENT 0.2 Ampere FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.057 gram SMX MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 .209 (5.31) .185 (4.70) .110 (2.79) .086 (2.18) .160 (4.06) .091 (2.31) .067 (1.70) .008 (0.20) .180 (4.57) .010 (0.25) .011 (0.28) .007 (0.18) .067 (1.70) .051 (1.30) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .059 (1.50) .035 (0.89) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) SYMBOL RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 50 o C Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Thermal Resistance Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range UNITS VRRM FM4032W 3200 VRMS 2240 Volts VDC 3200 Volts Volts IO 0.2 Amps I FSM 25 Amps (Note 2) RθJL (Note 3) Rθ JA CJ T J , T STG 60 100 15 -55 to + 150 SYMBOL FM4032W VF 1.8 Volts 30 uAmps 5.0 100 uAmps uAmps 0 0 C/ W C/W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage at 0.2A DC Maximum Full Load Reverse Current, Full cycle Average at TA = 75oC Maximum DC Average Reverse Current at Rated DC Blocking Voltage @T A = 25 o C IR @T A = 125 o C NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. Thermal resistance junction to terminal 6.0mm2 coppeer pads to each terminal. 3. Thermal resistance junction to ambient, 6.0mm2 coppeer pads to each terminal. UNITS 2004-5 REV: O .20 .16 .12 .08 Single Phase Half Wave 60Hz Resistive or Inductive Load .04 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1.0 TJ = 25 .1 PEAK FORWARD SURGE CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FM4032W ) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 40 30 20 10 0 1 2 6 8 10 4 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz FIG. 4 - TYPICAL JUNCTION CAPACITANCE 200 100 60 40 20 10 6 4 TJ = 25 2 1 Pulse Width = 300us 1% Duty Cycle 8.3ms Single Half Sine-Wave (JEDED Method) .1 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE, ( V ) .01 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON 100 Mounting Pad Layout 0.094 MAX. (2.38 MAX.) 0.060 MIN. (1.52 MIN.) 0.052 MIN. (1.32 MIN.) 0.220 (5.58) REF Dimensions in inches and (millimeters) RECTRON