RECTRON PR058A

PR058A
THRU
PR320A
SIDACTOR
FEATURES
*
*
*
*
*
*
Low switching noise
Low forward voltage drop
High current capability
High switching capability
High surge capabitity
High reliability
CELL
.006 (0.15)
.002 (0.05)
MECHANICAL DATA
*
*
*
*
*
Case: Molded plastic
Epoxy: Device has UL flammability classification 94V-O
Lead: MIL-STD-202E method 208C guaranteed
Metallurgically bonded construction
Mounting position: Any
.102 (2.6)
.087 (2.2)
.114 (2.9)
.098 (2.5)
.165 (4.2)
.150 (3.8)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
Off-state Capacitance (Note 1)
Peak One-Cycle Surge Current (Note 2)
SYMBOL
PR058A
PR065A
CO
PR075A
PR160A
PR190A
85
PR220A
PR275A
38
I TSM
PR320A
35
UNITS
pF
50
Amps
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL PR058A
PR065A
PR075A
PR160A
PR190A
PR220A
PR275A
58
65
75
160
190
220
275
320
V
77
88
98
220
260
300
350
400
V
Peak Off-state Voltage @I DRM = 5uA
Switching Voltage @I S = 800mA (Note 3)
VDRM
VS
Minimum On-state Voltage at 1.0A
VT
4
Holding Current
IH
150
NOTES : 1.
2.
3.
4.
Off-state capacitance is measured at 10KHz @0.3V with a DC48V bias.
Surge rating test standard : 10/100uS.
Vs is measured at 100V/uS.
“Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
PR320A UNITS
Volts
mA
2007-11
RATING AND CHARACTERISTICS CURVES ( PR058A THRU PR320A )
IT
IS
IH
IDRM
-V
VT
VDRM VS
+V
IPP, PEAK PULSE CURRENT, (% IPP)
+I
100
50
0
-I
tr
td
t, TIME, (uS)
FIG.1 V-I CHARACTERISTICS
FIG.2 PULSE WAVE-FORM
12
2.0
10
1.8
RATIO OF I (T =25OC)
H C
8
6
IH
PERCENT OF VS CHANGE, (%)
14
4
2
25 C
O
0
-2
-4
1.4
1.2
25 OC
1.0
0.8
0.6
0.4
-6
-8
-40
1.6
-20
0
20
40
60
80
100 120 140 160
TJ, JUNCTION TEMPERATURE, (OC)
FIG.3 NORMALIZED VS CHANGE vs.
JUNCTION TEMPERATURE
-40
-20
0
20
40
60
80
100 120 140 160
CASE TEMPERATURE, (OC)
FIG.4 NORMALIZED DC HOLDING CURRENT vs.
CASE TEMPERATURE
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.