RB500V-40 SCHOTTKY DIODES FEATURES * High current rectifier Schottky diode * Low voltage,low inductance * For power supply SOD-323 MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.004 grams .071(1.80) .063(1.60) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .106(2.70) .098(2.50) .003(.08) .006(.15) .014(.35) .010(.25) .055(1.40) .047(1.20) MAX.039(1.00) Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. REF .019(0.46) .004(.10) .000(.00) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@T A =25 OC unless otherwise noted) SYMBOL RATINGS Maximum Peak reverse voltage Maximum DC reverse voltage Maximum Peak Forward Surge Current Mean rectifying current Operating and Storage Temperature Range UNITS RB500V-40 VRM 45 VR 40 Volts Volts IFSM 1 Amps IO 0.1 Amps TJ,TSTG -40 to + 125 C O o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNITS Reverse voltage leakage current (VR=10V) IR - - 1 mA Forward voltage (IF=10mA) VF - - 0.45 V Diode Capacitance (VR=10V,f=1MHz) CT - 6 - pF Note: "Fully ROHS Compliant", "100% Sn plating (Pb-free)". VC 2007-4 RATING AND CHARACTERISTICS CURVES ( RB500V-40 ) IR. REVERSE CURRENT (mA) 10000 100 0.1 0 0.1 0.2 -25 O C 1 25 O C 12 5 O C 10 75 O C IF. FORWARD CURRENT (mA) 1000 0.3 1000 125OC 100 75OC 10 1 25OC 0.1 0.4 0.5 0.6 0.01 0.7 0 Figure2 Reverse characteristics 100 IO. CURRENT (mA) CT. CAPACITANCE BETWEEN TERNINALS (pF) 40 VR. REVERSE VOLTAGE(V) Figure1 Forward characteristics 100 30 20 10 VF. FORWARD VOLTAGE (V) 10 80 60 40 20 1 0 5 10 15 20 25 VR.REVERSE VOLTAGE (V) 30 35 0 0 25 50 75 100 TA.AMBIENT TEMPERATURE(OC) 125 Figure3 Capacitance between terminals characteristics Figure4 Derating curve(mounting on glass epoxy PCBs) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.