ALUMINUM ELECTROLYTIC CAPACITORS TL & TLA Series: Axial Low Leakage FEATURES •85°C, standard low leakage current series. SPECIFICATIONS Performance Item Life TL TLA AT 85°C 1000 Hrs AT 85°C 2000 Hrs Operating 40° ~ + 85°C Temperature Range Capacitance Tolerance ± 20% (120Hz, 20°C) Leakage Current I = 0.002CV or 0.4 ( A) whichever is greater (after 2 minutes) (at 20°C) Where, C = rated capacitance in Dissipaton Factor Tan at 120 Hz, 20°C Rated Voltage Tan (max) F. V=rated DC working voltage in V. 6.3 10 16 25 35 50 63 100 0.24 0.21 0.17 0.15 0.12 0.10 0.09 0.08 Impedance ratio shall not exceed the values given in the table below Low Temperature Rated Voltage Characteristics (at 120Hz) Impedance Ratio 6.3 10 16 25 35 50 63 100 Z(-25°C) /Z(+20°C) 5 4 3 2 2 2 2 2 Z(-40°C) /Z(+20°C) 10 8 6 4 4 3 3 3 Test Time Load Life Test at 20°C (after rated voltage is 1000/2000 Hrs Shelf Life Test at 20°C Test Time ± 20% (after exposure to 85°C Capacitance Change ± 30% Less than 200% of specifiec value for 1000 hours with no Dissipation Factor Less than 200% of specifiec value voltage applied. Leakage Current Within specified values Capacitance Change applied for 1000/2000 hours at 85°C) Dissipation Factor Leakage Current Cap. Ripple Current & Under 100 Frequency Multilpiers Within specified values F) Freq. (Hz) 60 120 500 1K 10K up 0.75 1.00 1.35 1.55 2.00 220 to 1000 0.83 1.00 1.23 1.32 2200 up above 0.90 1.00 1.12 1.10 Standards Ripple Current & Temperature (°C) Under 50 70 85 Multipliers 1.75 1.58 1.00 Temperature Multipliers 1.50 1000 Hrs 1.15 Satisfies Characteristic W of JIS C 5141 DIMENSIONS AND PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm) Ripple Current: mA/RMS at 120Hz 85°C VDC F Contents 6.3V(0J) DXL 10V(1A) mA DXL 16V(1C) mA DXL 25V(1E) mA DXL 35V(1V) mA DXL 50V(1H) mA 63V(1J) DXL mA DXL 100V(2A) mA DXL mA 0.1 0R1 5 x 12 1.5 5 x 12 3 5 x 12 3 0.22 0.33 R22 R33 5 x 12 5 x 12 3.5 5 5 x 12 5 x 12 4.5 7.5 5 x 12 5 x 12 4.5 7.5 0.47 R47 5 x 12 6 5 x 12 9 5 x 12 9 1 10 5 x 12 10 5 x 12 15 5 x 12 15 2.2 3.3 2R2 3R3 5 x 12 5 x 12 20 30 5 x 12 5 x 12 20 42 5 x 12 5 x 12 30 48 4.7 4R7 5 x 12 50 5 x 12 54 6.3 x 13 61 10 100 5 x 12 79 6.3 x 13 79 6.3 x 13 90 22 220 33 330 5 x 12 85 5 x 12 47 470 5 x 12 101 5 x 12 100 101 6.3 x 13 158 6.3 x 13 220 221 6.3 x 16 250 330 331 8 x 16 470 471 8 x 16 1000 102 2200 222 3300 4700 5 x 12 66 5 x 12 83 5 x 12 89 6.3 x 13 104 6.3 x 13 125 6.3 x 13 139 8 x 16 149 92 5 x 12 102 6.3 x 13 117 6.3 x 13 137 6.3 x 13 171 8 x 13 171 10 x 17 209 117 6.3 x 13 129 6.3 x 13 149 6.3 x 13 182 8 x 13 204 8 x 16 233 10 x 21 261 171 6.3 x 13 202 8 x 13 243 8 x 16 266 10 x 17 340 10 x 17 356 13 x 22 433 6.3 x 16 272 8 x 16 333 8 x 16 412 10 x 21 472 10 x 21 575 13 x 27 601 16 x 33 712 342 8 x 16 424 10 x 17 467 10 x 17 528 13 x 22 630 13 x 27 736 16 x 27 787 16 x 37 895 408 8 x 16 506 10 x 21 584 10 x 21 686 13 x 27 786 16 x 27 939 16 x 33 973 18 x 37 1109 10 x 17 681 10 x 21 773 10 x 21 927 13 x 27 1046 16 x 27 1226 16 x 37 1458 18 x 43 1559 13 x 22 1151 13 x 22 1248 16 x 27 1536 16 x 33 1719 18 x 37 2009 22 x 43 2440 332 13 x 27 1473 13 x 27 1597 16 x 27 1882 18 x 37 2246 18 x 43 2533 472 16 x 27 1879 16 x 27 2038 16 x 37 2390 18 x 43 2760 22 x 43 3190 LEAD SPACING AND DIAMETER D d 5 6.3 8 0.6 10 13 16 18 1.5 2.0 0.5 1.0 PART NUMBER EXAMPLE 22 1.0 0.8 TL 331 M 1H BK 130 270 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CG03 REV 2001