ALUMINUM ELECTROLYTIC CAPACITOR TN Series: Axial Non-Polar TN FEATURES •85°C, 1000 hours assured, standard non-polarized series. •Suitable for use in circuits which have a reversed or unknown polarity. •Bi-Polar types available (TB) (TBL). TNR* SPECIFICATIONS * TNR available by special request only.l Performance Item Operating Temperature Range -40°C ~ +85°C Capacitance Tolerance Leakage Current (at 20°C) ± 20% (120Hz, 20°C) I = 0.03CV or 3 (mA) whichever is greater (after 2 minutes) Where, C = rated capacitance in mF. V=rated DC working voltage in V. Rated Voltage 6.3 35 63 100 10 16 25 50 Tan (max) 0.25 0.22 0.18 0.16 0.14 0.12 0.10 0.09 When the capacitance exceed 1000 mF, 0.02 shall be added every 1000 mF increase. Impedance ratio shall not exceed the values given in the table below Rated Voltage 6.3 35 63 10 16 25 50 100 2 Z(-25°C) /Z(+20°C) 3 3 4 2 2 2 2 Impedance Ratio Z(-40°C) /Z(+20°C) 3 3 3 8 6 6 4 4 Test Time 1000 Hrs Capacitance Change ± 20% Dissipation Factor Less than 200% of specifiec value Leakage Current Within specified values The above specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 1000 hrs at 85°C Dissipation Factor Tan d at 120 Hz, 20°C Low Temperature Characteristics (at 120Hz) Load Life Test Test Time 1000 Hrs Capacitance Change ± 20% Dissipation Factor Less than 200% of specifiec value Leakage Current Within specified values The above specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hrs at 85°C without voltage applied. Satisfies Characteristic W of JIS C 5141 Shelf Life Test Standards DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 85°C VDC 6.3V(0J) Code DXL 10V(1A) mA DXL 16V(1C) mA DXL 25V(1E) mA DXL 35V(1V) mA DXL 50V(1H) mA DXL 63V(1J) mA DXL 100V(2A) mA DXL mA 0.1 0R1 6.3 x 13 5 6.3 x 13 5 6.3 x 13 0.22 R22 6.3 x 13 7 6.3 x 13 8 6.3 x 13 8 0.33 R33 6.3 x 13 9 6.3 x 13 10 6.3 x 13 10 0.47 R47 6.3 x 13 10 6.3 x 13 12 6.3 x 13 12 1 010 6.3 x 13 16 6.3 x 13 18 6.3 x 13 18 5 2.2 2R2 6.3 x 13 23 6.3 x 13 27 6.3 x 13 27 3.3 3R3 6.3 x 13 29 6.3 x 13 31 6.3 x 13 35 4.7 4R7 6.3 x 13 34 6.3 x 13 10 100 46 6.3 x 13 54 8 x 13 22 220 33 330 6.3 x 13 6.3 x 13 6.3 x 13 61 6.3 x 13 69 6.3 x 13 71 6.3 x 13 80 8 x 13 85 8 x 16 8 x 13 89 8 x 16 101 10 x 16 109 10 x 17 74 40 6.3 x 13 42 59 8 x 16 69 97 10 x 21 120 139 10 x 21 153 47 470 6.3 x 13 85 8 x 13 95 8 x 13 113 8 x 16 120 10 x 17 152 10 x 21 174 13 x 22 203 100 101 6.3 x 13 118 8 x 13 147 8 x 16 155 10 x 17 192 10 x 21 205 10 x 21 232 13 x 22 269 16 x 27 317 220 221 8 x 16 195 8 x 16 254 10 x 17 268 10 x 21 298 13 x 22 338 13 x 27 381 16 x 27 447 16 x 37 501 330 331 8 x 16 239 10 x 17 312 10 x 21 344 13 x 22 387 13 x 27 433 16 x 27 500 16 x 33 567 18 x 42 792 470 471 10 x 17 333 10 x 21 389 13 x 22 436 13 x 27 483 16 x 27 552 16 x 33 618 1000 102 13 x 21 508 13 x 22 603 13 x 27 664 16 x 27 781 16 x 37 857 18 x 42 1054 2200 222 13 x 27 836 16 x 28 1000 16 x 37 1121 18 x 42 1355 LEAD SPACING AND DIAMETER D d 6.3 8 10 13 16 0.6 0.8 1.5 2.0 0.5 1.0 PART NUMBER EXAMPLE 18 TN 331 M 0J TR 080 160 TNR 331 M 1V TA 130 320 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CG04 REV 2001.10.31