ALUMINUM ELECTROLYTIC CAPACITORS VE2 Series: Surface Mount Type, Low Profile FEATURES •85°C, 2000 hours assured •5.5 mm, maximum height •Replaces SME and RV2 Series •RoHS Compliant SPECIFICATIONS Item Performance -40°C ~ + 85°C Operating Temp. Range Capacitance Tolerance ± 20% (120Hz, 20°C) I=0.01CV or 3µA (whichever is greater) after 2 minutes, where C=rated capacitance in µF and V=rated DC working voltage Leakage Current (at 20•C) Dissipation Factor Tan 4 6.3 10 16 25 35 50 0.42 0.28 0.24 0.20 0.14 0.12 0.10 4 6.3 10 16 25 35 50 Z(-25°C)/Z(+20°C) 7 3 3 2 2 2 2 Z(-40°C)/Z(+20°C) 15 8 5 4 3 3 3 Rated Voltage at 120 Hz, 20°C Tan (max) Rated Voltage Low Temperature Characteristics (at 120Hz) Impedance Ratio Maximum Test Time Load Life Voltage 1000 Hrs Within ± 20% of initial value(4WV : ±30%) Within ± 20% of initial value(4WV : ±30%) Dissipation Factor Less than 200% of specified value (4WV : 300%) Less than 200% of specified value (4WV : 300%) Leakage Current Within specified value Within specified value Test Conditions 20°C (after rated voltage applied for 2000 hours at 85°C 20° C (after storage for 1000 hours at 85°C without voltage) Capacitance Change Life Test 50 120 1K 10K up Under 16 0.80 1.00 1.15 1.25 25 ~ 35 0.80 1.00 1.25 1.40 50 0.80 1.00 1.35 VDC(V) Freq. (Hz) Ripple Current & Frequency Multilpiers Shelf Life 2000 Hrs Standards 1.50 JIS C 5101-1-18 DIMENSION & PERMISSIBLE RIPPLE CURRENT VDC µF Code 4V (0G) D x L 6.3 (0J) mA D x L 10 (1A) mA D x L 16 (1C) mA Dx L Ripple Current mA/rms at120 Hz, 85°C 25 (1E) mA D x L mA 35 (1V) D x L mA 50 (1H) D x L mA 0.1 0R1 4 x 5.3 3 0.22 R22 4 x 5.3 5 0.33 R33 4 x 5.3 6 0.47 R47 4 x 5.3 7 1 010 4 x 5.3 10 2.2 2R2 4 x 5.3 15 3.3 3R3 4 x 5.3 19 4.7 4R7 10 100 22 220 33 330 4 x 5.3 47 470 4 x 5.3 100 101 5 x 5.3 220 221 6.3 x 5.3 4 x 5.3 19 4 x 5.3 20 5 x 5.3 26 6.3 x 5.3 44 4 x 5.3 23 4 x 5.3 26 5 x 5.3 32 5 x 5.3 34 5 x 5.3 39 5 x 5.3 44 6.3 x 5.3 55 6.3 x 5.3 59 5 6.3 x 5.3 67 4 x 5.3 31 31 5 x 5.3 44 x 5.3 48 6.3 x 5.3 63 37 5 x 5.3 52 6.3 x 5.3 67 6.3 x 5.3 75 63 6.3 x 5.3 89 6.3 x 5.3 98 6.3 x 5.3 103 110 6.3 x 5.3 120 PAD SPACING AND DIAMETER L±0.2 A±0.2 B±0.2 C±0.2 W P±0.2 4 5.3 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3 6.6 6.6 2.7 0.5 to 0.8 2.0 D±0.5 PART NUMBER EXAMPLE VE2 100 M 1E TR 050 053 0.3 max D B + L W A C RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] P C C1CB02 REV 2006.1.18