RFSOLUTIONS RFCARDHITAG2

RFID PROXIMITY
ACCESS CONTROL
RFID231C-SYS
Features
• Complete Proximity Access System Kit
• Transponder Cards Read Up To 4 Inches Range
With Internal Aerial.
•
•
•
•
•
•
•
•
•
System Includes
q Control & Sensor Units
q 10 Transponder Cards.
q Power Supply Unit
q Connecting Cable
q Door Strike
q All Screws & Fixings
Exit Switch Option
Programmable up to 50 Cards.
Led Indicators For Power & Accept/Reject.
Relay Contacts 2A@12Vdc.
User Programmable Relay, 0.5 Secs To 10 Mins
Easy Learn, Erase Cards Via Internal Switch.
RS232 Serial Coms to PC.
Real Time Data Logging Output.
Description
The RFID Proximity Access System provides controlled access to premises by means of high-security
transponder card technology. These are similar to credit cards in size and appearance, but no physical contact
is required with the reader for the card to be scanned.
When an authorised card is placed within 4 inches of the sensor, the relay output will operate for a preset time.
The system consists of a control unit and a remote sensor unit that can be fitted to the outside of a building.
The control unit simply requires power and relay connections to operate. The sensor unit connects to the
control unit with the cable provided.
The system has the capacity to learn up to 50 transponder cards. Programming is achieved using either a
pushbutton inside the control unit, or from PC connected to the Control Unit RS232 serial port (only two
connections required).
Connection to a PC enables many other functions including; control of the relay output from the PC, data
logging information of which transponder card has operated the system.
The system is supplied in an ABS plastic enclosures and are IP65 rated.
Block diagram
Internal Antenna
Control Unit
Internal Antenna
External
Sensor Unit
Card
Reader
Relay
Output
DS231_1 Mar 2000
RS232
Interface
2000 REG No 277 4001, ENGLAND.
Page 1
RFID PROXIMITY
ACCESS CONTROL
RFID231C-SYS
System Installation
A full installation guide is provided with the system (DS000230). This is also available from our website.
Technical specification
Features
Protocol
User Range
Maximum No of Cards
User feedback
Programming Features
Relay output
Relay Operation Time
PC Interface
PC Commands
Data Logging Output
Mounting
Environmental Protection
Enclosure Material
Power Supply: UK Version
Power Supply: INTL
Version
Power Consumption
Dimensions
Operating Temp
Storage Temp
Specification
Hitag2
Upto 15cm
50
LED
Yes
2A @ 12Vdc
½ Sec – 10 mins
RS232
9
Yes
Wall or Pole
IP65
ABS
UK 230Vac
INTL 110 –240Vac
~50mA
~90mA
110 x 85 x 35mm
o
-0 to + 70 C
o
-55 to + 125 C
Comments
Philips high security Protocol
Using standard Transponder card
Data Accept / Reject LED Indication on Sensor and Control Unit
Via 2 onboard Switches or PC control Interface
Standard British Telecom BT47W/6 Changeover Contacts
Programmable via onboard Switches or PC
2 wires only!
Complete Configuration through PC is possible.
Real time through RS232
With Screw fixings provided
UK Plug top
Standard International IEC Input
Quiescent
Operating Relay
Technical specification: Transponder Card
Features
Card Type
Material
Size
Specification
ISO Hitag2
White PVC
PART No
RFID231C-SYS
RFCARDHITAG2
Comments
Can be any Hitag2 card package
May be Custom Silk Screened
As standard credit card
DESCRIPTION
RFID Proximity Access System with 10 Cards
Spare RFID Card tag (Pack of 10)
Should you require further assistance, please call;
R. F. Solutions Ltd,
Unit 21, Cliffe Ind Est, South St, Lewes, E Sussex, BN8 6JL. England.
Tel +44 (0)1273 898 000.
Fax +44 (0)1273 480 661.
Email [email protected]
http://www.rfsolutions.co.uk
RF Solutions is a member of the Low Power Radio Association.
Information contained in this document is believed to be accurate, however no representation or warranty is given and no liability is assumed by R.F. Solutions Ltd. with respect to the accuracy of
such information. Use of R.F.Solutions as critical components in life support systems is not authorised except with express written approval from R.F.Solutions Ltd.
DS231_1 Mar 2000
2000 REG No 277 4001, ENGLAND.
Page 2